Table of Contents
How do I check my transfer case fluid level?
Checking transfer case fluid level. If fluid is level with the fill plug hole, or just dribbles out, the case is full. If it pours out, the case is over-filled.
Does transfer case take fluid?
Your transfer case fluid level should be checked every time that you get an oil change. In the old days, transfer cases were filled with gear oil or automatic transmission fluid (ATF), but some modern transfer cases take specialty lubricants.
How much fluid goes in a transfer case?
At any rate, it’s about 4 3/4 quarts. There are two pints in every quart.
What fluid does a transfer case take?
Transfer cases may be filled with gear oil, automatic transmission fluid (ATF), or specialty lubricants. It is important to regularly inspect the transfer case for any damage, leaks, or other concerns.
How do you add fluid to a transfer case?
Locate the filler plug on the side of the transfer case. Clean the filler plug and the area around it using a shop rag; this avoids contaminating the new transfer case fluid. Using a wrench or ratchet and socket, remove the filler plug. Add the new fluid to the case using a small funnel.
What happens if transfer case is low on fluid?
Difficulty changing gears – Low or dirty transfer case fluid can affect your transmission’s ability to shift gears. It can also result in your car unexpectedly falling out of four-wheel drive. Loud noises while driving – As the transfer case fluid loses its lubricating properties, friction will occur inside.
What happens if transfer case has no fluid?
If the seals leak, fluid escapes and is no longer able to properly lubricate the interior components of the transfer case. Eventually the parts inside will wear out and overheat. If this happens, the transfer case will be rendered useless and the four-wheel drive operation will not work.