Table of Contents
What type of transmission fluid does a Mazda take?
NOTE:• ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCON®LV ATF. ATF M-V (TYPE M5) HAS A GREATER VISCOSITY THAN MERCON®V AND MERCON®LV ATF IN LOW TEMPERATURES….AUTOMATIC TRANSMISSION FLUID SERVICE APPLICATION.
| Model | Required Service Fluid | Mazda Part Number |
|---|---|---|
| 2006-2015 Mazda5 | ATF M-V (TYPE M5) | 0000-77-112E-01 |
What kind of transmission fluid does a Mazda 3 2010 take?
In Your 2010 Mazda3 , You should use a full synthetic Mercon ATF fluid, such as Valvoline MaxLife’s, which sells for $30 at O’Reilly’s. This will be suitable for both topping off a low transmission fluid reservoir as well as using for a full flush.
What type of transmission fluid does a 2008 Mazda 3 take?
Lubegard Synthetic Synthetic Transmission Fluid Dexron VI 1 Quart.
What type of transmission does a Mazda 3 have?
The 2020 Mazda3 is available with both manual and automatic transmission options. The SKYACTIV®-MT six-speed manual transmission option is only available on the 2020 Mazda3 Premium trim level of the hatchback body style equipped with front-wheel drive.
What type of fluid should I use for my transmission?
While both automatic and manual transmission vehicles utilize transmission fluid, the most commonly used fluid is Automatic Transmission Fluid (ATF). ATF is typically manufactured with a refined mixture of base oil and a combination of additives.
What kind of automatic transmissions does Mazda use?
Mazda vehicles that use a transverse 4-speed automatic transmission designated as LA4A-EL can experience problems ranging from gear slippage to erratic or failed gearchanges. In most cases, this will happen suddenly, and usually when the car is warm.
What type of transmission fluid is used in a car?
Manual transmission fluid can vary, however, using either plain motor oil, a transmission oil known as heavyweight hypoid gear oil, or automatic transmission fluid. The type of transmission fluid to use in vehicles with standard transmissions can usually be found in the maintenance section of the owner’s manual.
Does your automatic transmission need a flush?
An automatic transmission’s fluid is kept inside the hydraulic lines, so it needs to be ‘flushed’ or pushed through the lines to drain effectively. This also serves a secondary purpose. The transmission flush also pushes debris and other small particles that develop from the transmission filter’s worn out fibers.