Menu Close

How do I add diagnostics to my Bosch dishwasher?

How do I add diagnostics to my Bosch dishwasher?

Bosch Dishwasher Troubleshooting:

  1. Make sure the dishwasher is switched off.
  2. Press and hold the Power Scrub Plus and Regular Wash buttons.
  3. Turn on the dishwasher, then release the two buttons.
  4. The light above each of these buttons should flash.

How do I know if my dishwasher impeller is bad?

To check this, run your dishwasher and see if water pooled at the bottom of the washer. If you notice a large puddle there, you probably have a pump motor problem. When your dishwasher is draining, you hear a high-pitched whining noise. The whining noise tends to be the sound of a dying motor or a jammed pump.

What does an impeller do in a dishwasher?

In most dishwashers, the water pump is located under the lower sprayer arm. This component pumps the water through the dishwasher. The pump has two impellers, top and bottom. These, as well as other components, can become clogged with food or detergent.

What are the cycles on a Bosch dishwasher?

MAIN CYCLES:

  • Heavy Wash (135 min, 6.1-7.2 gal, 151-162 F wash, 162 F rinse)
  • Auto Wash (95-119 min, 2.7-5.9 gal, 126-162 F wash, 156-162 F rinse)
  • Normal Wash (115 min, 2.4-4.8 gal, 122-156 F wash, 113-156 F rinse)

How do I know if my Bosch dishwasher pump is bad?

SYMPTOMS. Dishwasher circulation pump impeller and seal kit. Poor washing, leaking and noise during operation are all indications of a circulation pump problem. If the dishwasher does not wash properly then the wash impeller could be worn or the motor could be defective.

How do I know if my Bosch dishwasher circulation pump is bad?

Poor washing, leaking and noise during operation are all indications of a circulation pump problem. If the dishwasher does not wash properly then the wash impeller could be worn or the motor could be defective.

How do I know if my circulation pump is bad on my dishwasher?

The wash pump motor will make a loud noise when it is defective. You may also see cleaning problems due to decreased spray pressure. If the pump motor is bad, it will need to be replaced. The motor can usually be released and removed from the sump under the dishwasher tub.