Table of Contents
Where is the check engine light bulb located?
dashboard panel
The check engine light, often referred to as the Malfunction Indicator Lamp or MIL, allows the PCM to alert the driver that an emissions related problem has occurred or is currently occurring. The check engine light is located on the dashboard panel and is colored red or yellow.
How do you turn off the check engine light on a 2004 Toyota Tundra?
Find the “Delete” button on the faceplate of the scanner and press it. If there is no delete button, scroll through the menu options on the scanner using the arrow keys and select “Erase Codes.” The check engine light will shut off.
How do you turn off the check engine light on a Toyota Tundra?
1. Using a Scan Tool
- Connect the scan tool to the onboard diagnostic connector. This is found under the steering column.
- Press the READ button on the scan tool, and look for any error codes.
- Press the ERASE button on the tool to remove the error code. The check engine light will then turn off.
What do the yellow and red symbols mean on a Toyota dashboard?
Yellow icons indicate an item of importance (such as low fuel), but are not necessarily a warning. Red icons indicate a condition that requires immediate attention, such as an open door or low engine oil pressure. See your vehicle’s Owner’s Manual for more details. Countless reasons to join.
What does the indicator light mean on a Toyota?
The indicator light flashes after the ENGINE START STOP switch has been turned off to indicate that the system is operating. The indicator light stops flashing after the ENGINE START STOP switch has been turned to ACCESSORY or IGNITION ON mode to indicate that the system has been canceled.
What does it mean when your Toyota headlight comes on?
Indicates that the headlight high beams have been switched on. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Indicates that the engine oil pressure is too low. Indicates low fuel level.
What does the buzzer on the Toyota dashboard mean?
A buzzer sounds and the warning light flashes to indicate that the master warning system has detected a malfunction. Warns the driver and/or front passenger to fasten their seat belts. Warns the driver and/or front passenger to fasten their seat belts.