Table of Contents
How do I reset my Chevy gauge cluster?
All you have to do is turn the key to the run position (do not start the vehicle) and push the reset stem five times. Make sure the trip odometer is displaying and hold the stem in for 30 seconds.
How do I remove the malfunction indicator light?
How do I reset my malfunction indicator light? Another simple approach to get rid of the check engine light is to turn on and off the car three times. Insert the key in the ignition, turn the car on for a second, and turn it off for another second. Repeat this process three times.
Why are the lights on my dash not working?
Flip the switch or turn the dial or knob up and see if the lights on your dash come on or get brighter. If adjusting the switch doesn’t work, you may have a blown fuse or bad lightbulb. Or, the entire switch may be faulty, in which case, have it replaced by a certified mechanic.
How can i dim the lights on my dashboard?
Put the key in the ignition and turn it to the “on” or “accessory” position. Then, turn on your headlights. Locate the dimmer switch for your lights. Most vehicles have a dashboard light control switch that will dim the dashboard lights as well as turn them off.
Where are the lights on the dashboard located?
Most vehicles have a dashboard lights control switch that will dim the dashboard lights, as well as turn them off. Check the control switch, which should be located on the console near the steering column or part of the headlight switch. Tail lights and dash lights are connected through the tail light (and/or brake light) fuse.
How are the tail lights and dash lights connected?
Tail lights and dash lights are connected through the tail light (and/or brake light) fuse. When the dashboard goes dark you know you are driving without tail lights. Make certain to use the exact replacement dashboard light fuse to avoid the potential of electrical failure in your vehicle’s dashboard.