How do you clean soot off of ceramic logs?

How do you clean soot off of ceramic logs?

Wipe the logs with a rag. To remove soot still clinging to the logs, use a dry, soft rag. Wipe it over the whole log. The soot should brush off without exposing the logs to water or cleaner that could damage the logs or create more soot. Cleaners should only be used if they are approved in the owner’s manual.

Do you need to replace ceramic logs?

If that’s the case with yours, depending on usage, they can begin to fade in appearance over tine, and likely need to be replaced every 2-3 years. However, most gas logs these days are ceramic, and they tend to last a big longer as they are extremely durable and resistant to extremely hot temperatures.

How do you stop soot buildup on gas logs?

A technician can often reduce soot levels simply by cleaning out the air intake shutters and restoring the air-fuel ratio. Gas fireplaces that contain ceramic logs used to mimic the look of a wood-burning fireplace often fall prey to another problem having to do with flame impingement.

Is it normal for gas logs to blacken?

Soot on vented gas logs is nothing to worry about. It is a natural occurrence when the yellowish flames of a gas log impinge on a rough surface. Some people like the look, some don’t. If you don’t, we suggest that you VERY CAREFULLY take the logs outside and brush the soot off with a whisk broom.

How long do ceramic logs last?

A: In the average home, a well-maintained vented log set with ceramic logs will last 10 or more years. A well-maintained vent-free log set with ceramic logs can also last a long time, but, if heavily used, will begin to wear in 3-5 years.

How do you get soot off fireplace logs?

Use a damp rag or lint-free cloth to wipe off the soot, carbon, and dust from the logs, at least once per year. Be careful to avoid scratching the logs, or they will no longer be useable. Liquid gas log cleaners are also available at your local fireplace dealer and may make it easier to clean.

What can I use instead of ceramic logs?

Contemporary Alternatives to Gas Logs

• Shown Above: Wrought Iron Burning Windswept Tree Sculpture in Roman Bronze with R. H. Peterson Glass Burner and Gold Reflective Glass.
• Burning Twigs (NEW)
• Fire Glass.
• Fireball Spheres.
• River Rocks.
• Gas Goal Grate.
• Direct Vent Fireplaces.
• Fire Pit Logs.

What causes black soot on fireplace glass?

So why does the glass on your fireplace turn black? Blackened or cloudy fireplace glass is caused a buildup of soot and other small particles on the glass as a result of the fuel in the fireplace not burning properly, or a lack of ventilation over the inside of the glass.

Why is my fireplace glass black?

If your glass fireplace doors have turned black, it’s because excess soot is being produced when you burn a fire. In the majority of cases, this over-production of soot is due to a problem with either the oxygen or the fuel part of the fire triangle.

Are ceramic logs supposed to burn?

Fake gas fireplace logs are made of ceramic or a similar material. These absorb high amounts of heat without being damaged. Without them, most of the heat from the burning gas would just escape out the vent. By retaining more heat, the ceramic provides warmth and comfort for your home.

Do ceramic logs burn?

When the gas logs are ignited, the ceramic logs will produce a steady flame. As propane or natural gas is pumped through the pipes, it burns harmlessly on the surface of the ceramic logs. Unlike the process of building a fire, igniting a gas log is a very simple procedure.

What causes black soot buildup on my gas fireplace logs?

The ratio of gas and oxygen may need to be adjusted. A rich gas mixture makes the flame more orange and flickering, which is appealing to most fireplace owners, but too much gas will cause the black powdery build up on the logs, and even on the fireplace insert. Propane fireplaces usually create more soot than natural gas burning units.

Is it OK to put ceramic logs in gas fireplace?

By retaining more heat, the ceramic provides warmth and comfort for your home. They also look nice. But sometimes the logs fall over or have other issues, and need to be replaced or put back in position. Let’s take a closer look at the three reasons you should never arrange your own ceramic gas fireplace logs. 1.

Why is the glass on my fireplace going black?

Most modern stoves have built-in airwash technology that uses a specially designed vent at the top of the stove to draw in air over the fireplace glass to prevent it from going cloudy or black.

Why do you put fake logs in your fireplace?

Too many websites out there tell you fake logs are only for “aesthetics” – for a visually pleasing fireplace since you aren’t using any wood. Not true. They are also there to provide heat while improving safety. Place them incorrectly, and you risk unnecessary danger. 2. Fireplace Function – save money, make it last