Table of Contents
What is another name of IPv6 Mcq?
IPv6 (Internet Protocol version 6) is a set of specifications from the Internet Engineering Task Force (IETF) that is essentially an upgrade of IP version 4 (IPv4), a category of IP addresses in IPv4-based routing.
What is meant by IPv6?
The IPV6 definition stand for Internet Protocol version 6 (IPV6). It’s the latest version of the Internet protocol which allows computers to uniquely identify and locate other computers and devices on the Internet.
What are the two types of IPv6?
IPv6 Address Types
- Unicast—For a single interface.
- Multicast—For a set of interfaces on the same physical medium. A packet is sent to all interfaces associated with the address.
- Anycast—For a set of interfaces on different physical media.
Is IPv6 same as Mac?
Address Length and Representation: In IP address, Ipv4 has an address length of 32-bits, while IPv6 has an address length of 128-bits. On the other hand, the MAC address is a 48-bits address. On the other hand, no such network classes are used for addressing the MAC address for a specific device.
What is IPv4/IPv6 Mcq?
Explanation: An IPv6 address is 128 bits long. Therefore, 2128 i.e. 340 undecillion unique addresses are available in IPv6. IPv4 has only 4 billion possible addresses and IPv6 would be a brilliant alternative in case IPv4 runs out of possible new addresses.
What are the different types of IPv6 address types & formats?
IPv6 addresses range from 0000:0000:0000:0000:0000:0000:0000:0000 to ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff . In addition to this preferred format, IPv6 addresses might be specified in two other shortened formats: Omit leading zeros. Specify IPv6 addresses by omitting leading zeros.
Which type of IPv6 address refers to any?
An anycast address is any unicast IPv6 address that is assigned to multiple devices.
What are the three IPv6 addresses displayed?
IPv6 addresses have three types: Global Unicast Address –Scope Internet- routed on Internet. Unique Local — Scope Internal Network or VPN internally routable, but Not routed on Internet. Link Local – Scope network link- Not Routed internally or externally.
How do I enable IPv6 on my router?
This Article Applies to:
- Log in to the web-based interface of the router.
- Go to Advanced > IPv6.
- Enable IPv6 and select the internet connection type provided by your ISP.
- Fill in information as required by different connection types.
- Configure LAN ports.
How do I configure IPv6?
When you configure an IPv6 address for an interface, you must also configure an IPv4 address….Enable IPv6
- Select Network > Interfaces. The Network Interfaces page appears.
- Select an external interface. Click Configure. The Interface Settings dialog box appears.
- Select the IPv6 tab.
- Select the Enable IPv6 check box.
What is IPv6 notation?
An IPv6 address consists of 128 bits written in a hexadecimal notation and groupings of 16 bits, called hextets, separated by colons. An IP address is divided into two logical parts, the network prefix and the host identifier. All hosts on a subnetwork have the same network prefix.
What is an IPv6 format?
IPv6 address format. An IPv6 address is 128 bits long, much larger than a 32-bit IPv4 address. Also, unlike IPv4, which uses a dotted-decimal format with each byte ranges from 0 to 255, IPv6 uses eight groups of four hexadecimal digits separated by colons.
How does IPv6 addressing work?
How IPv6 address works. IPv6 uses a special feature called autoconfiguration to find and assign IP address configuration to hosts on the network. IPv6 autoconfiguration can be Stateful ( DHCPv6 ) or stateless.