Table of Contents
How do you take care of a drafting board?
Clean board regularly (household degreaser or low-odour white spirit), check for smoothness and wash hands before working; covering the drawing board first with a paper underlay will result in stronger pencil lines and will also minimize damage to the board when using a compass; fix paper to board with small diagonal …
How do you take care of T Squared?
Care and maintenance:
- Take care not to damage the ruling edge of the T-square.
- Dents will make it unusable.
- Always clean the T-square before use.
- Don’t use the T-square as a hammer – or an axe!
- Don’t let the T-square fall on the floor.
Why does a drafter need a T-square?
A T-square is a technical drawing instrument used by draftsmen primarily as a guide for drawing horizontal lines on a drafting table. It may also guide a set square to draw vertical or diagonal lines. T-squares are also used to measure and cut drywall.
How do you take care of a compass in drafting?
Protect compass and divider points by inserting them into a piece of soft rubber or similar material. Never store ink pens without first cleaning and drying them thoroughly.
What are the 12 drafting materials?
There is a variety of different tools available for this kind of professional work:
- Mechanical pencils.
- Clutch pencils.
- Technical pens.
- Rulers.
- Compass.
- Drawing boards.
- Erasers.
- Sharpeners.
What is architectural drafting?
Architectural drafters detail building codes, dimensions, and materials to be used and procedures to be followed by building contractors. In fact, architectural drafters may specialize by the type of building structure or by the kind of material used, be it reinforced concrete, masonry, steel, or timber.
What are the 5 tips on keeping your drawing clean?
So let me give you 5 simple tips to keep it clean.
- Use baby wipes to clean your hands.
- Cover your easel and work area with paper towels.
- Use Swiffer dusting cloths to clean charcoal dust from your work area.
- Use a mahlstick to keep your hand off the paper when you’re drawing.
- Keep a handheld vacuum in your studio area.
What’s the best way to clean a dry erase board?
If you are looking for a chemical-free way to clean your dry erase board, there are a few ways for you to keep your whiteboard clean. Magic Eraser: By wetting a magic eraser, you are able to clean the whiteboard’s surface while removing stains and ghosting.
What’s the best way to clean a wood cutting board?
Let sit for a few minutes before rinsing off. After you have disinfected your board, the most important part is to wipe it with a dry cloth. This last step is the most important for maintaining your cutting board, as water permeating the wood is what causes the wood fibers to swell and then warp your board.
What’s the best way to remove stains from a whiteboard?
To remove such stains, start by completely writing over the stains with fresh dry erase marker. Allow the marker to dry. This should only take a few seconds. Then, rub the marks with a cloth or the whiteboard eraser.
How often should I clean my white board?
Clean the board every one to two days. Start with a whiteboard eraser, which will remove the majority of fresh marks, as long as they haven’t been there for more than a couple days.