Table of Contents
Why does DVD player keep ejecting disc?
Accumulated dust and dirt on the tray Over time, dust and dirt will accumulate and get on the tray which will cause read errors on your CDs and DVDs. When those read errors are detected, the disc drive will automatically eject to prevent damage to itself, and the laser lens.
The Eject key is usually located near the volume controls and is marked by a triangle pointing up with a line underneath. In Windows, search for and open File Explorer. In the Computer window, select the icon for the disc drive that is stuck, right-click the icon, and then click Eject. The disc tray should open.
Why does my CD drive keep ejecting?
Accumulated dust and dirt can get on the tray and cause read errors on your CD. When those read errors are detected, the CD drawer will automatically eject to prevent damage to the drive and the laser lens. If the drive has been cleaned and reseated, the problem is most likely a dirty laser lens.
Why does my CD keeps ejecting on Mac?
Over time a drive’s lens may collect dust and debris, which can prevent the lens from reading properly. If this happens then most discs inserted into the drive will be ejected, including commercial discs. To remedy this, you can try blowing compressed air into the drive in an attempt to dislodge any debris on the lens.
What to do if your DVD player won’t eject?
Press the POWER, STOP and EJECT buttons simultaneously. Press the DISC1, STOP and EJECT buttons simultaneously. If you have RDR-GX330 DVD recorder, perform the easy setup to resolve this issue. If the issue still occurs after completing all of the troubleshooting steps above, repair may be required. Go to Product Repair.
How do you install a DVD player without power?
Turn off the DVD player. Unplug the power cord of the DVD player from the electrical outlet. Allow the DVD player to remain without power for one minute. Plug the power cord back into the electrical outlet. Turn on the DVD player. Attempt to insert the disc into the DVD player.
How to troubleshoot the child lock on a DVD player?
Follow the steps below to troubleshoot this issue: 1 Make sure the child lock feature is disabled. 2 Try to open the disc tray. 3 If the issue still occurs, power off your DVD player. 4 Unplug the power cord for 30 seconds and then plug it back in. 5 Power on your device. 6 Try to open the disc tray.
How to open the disc tray on a DVD player?
1 Try to open the disc tray. 2 If the issue still occurs, power off your DVD player. 3 Unplug the power cord for 30 seconds and then plug it back in. 4 Power on your device. 5 Try to open the disc tray. See More….