How can I tell how old my carrier furnace is?

How can I tell how old my carrier furnace is?

The most common way to to determine the carrier ac age is through the serial number. In the above style, the determining factor is having a letter in the middle of the serial number. The first two digits are the week of manufacturer. The second set of digits are the year of manufacture.

How do you read a carrier furnace code?

Each status code is a two-digit number. The first number is determined by the number of short flashes and the second digit by the number of long flashes. Line voltage polarity is reversed. If twinned, refer to twinning kit instructions.

How old is a carrier weathermaker 9200?

The Carrier Weathermaker 9200 gas furnace is not currently manufactured by the company; the last listing of the product from Carrier is dated 2001. The Weathermaker 9200 can achieve an AFUE of 95.5 percent and features two heat exchangers to obtain maximum heating from the fuel consumed.

How do I find my carrier model number?

Remove the front door and look inside the unit. You should see the model number printed on rating-plate or decal.

How do I find out what year my HVAC is?

Go to the outside cabinet of the air conditioning system. You’ll find a metal nameplate attached to it containing the system’s technical specs. On most units, the nameplate is fixed to the backside of the cabinet. Near the top of the nameplate you should see the manufacturer’s date as a month and year.

What is a code 33 on a Carrier furnace?

Error 33 is a Limit Circuit Fault. It means that the high limit or flame rollout switch is open. Error 13 means that the limit or flame rollout has been open for more than 3 minutes.

What do Carrier furnace yellow light codes mean?

high-fire mode
What it means: If you’re wondering, “What does the yellow light on my Carrier furnace mean?” it signifies that the furnace is stuck in high-fire mode. The high-fire mode should only operate for short periods of time to heat a very cold house faster.

Where is the filter on a carrier weathermaker 9200?

Answer: The filter on the Carrier Weathermaker 9200 is located at the bottom on the furnace.

How do you fix code 33 on a carrier furnace?

Check for air flow issues

1. Check condition of filter.
2. Open all vents and return registers.
3. Make sure the ducts and register grilles are clean.
4. Clean the A/C evaporator coil.
5. Check condition of the blower wheel.
6. Check blower motor and capacitor to make sure the blower motor is running up to speed.

How can you tell how old your AC unit is?

Check the upper-right hand corner of the nameplate for the unit’s manufacture date. If the manufacture date is not visible on the condenser, you can always locate the brand, model and serial number on the plate, which will help to determine the age of the unit.

Is the carrier 58mxa heat exchanger a must?

The model 58MXA is a must for your product line. This high-efficiency furnace allows more applications with its reliable 4-way multipoise design. The model 58MXA is available in 10… Page 2: Heat Exchangers

Can a 58mxa furnace be converted to propane?

Page 4 A93202 NOTES: 1. The 58MXA Furnaces are for use with natural gas, but can be field-converted for propane gas with a factory-authorized and listed accessory conversion kit. 2. Component location and configuration may be different than shown above.

Who is the parent company of carrier HVAC?

Parent Company: Carrier Corporation a subsidiary of UTC Climate, Controls & Security Systems, a subsidiary of United Technologies Corp. Sister or similar Brands Include: Aquazone® | BDP® | Carrier® | Day & Night® | Resco® | Weathermaster® Support Us! Click the Circle Above…

How to determine date of production or age of carrier HVAC systems?

How to determine the date of production/manufacture or age of Carrier® HVAC Systems. The date of production/manufacture or age of Carrier® HVAC equipment can be determined from the serial number located on the data plate.