Table of Contents
What is plan view on a drawing?
The term “plan” may casually be used to refer to a single view, sheet, or drawing in a set of plans. More specifically a plan view is an orthographic projection looking down on the object, such as in a floor plan.
What does plan view mean?
Definition of plan view : the appearance of an object as seen from above.
What are the 3 types of views in blueprint?
3 Types of Views in Blueprints
- Plan view drawing: A plan view is a drawing on a horizontal plane depicting a bird’s eye view of a structure from above.
- Elevation view drawing: An elevation view is a drawing on a vertical plane that depicts how the building looks when viewed from the front, back, left, or right side.
How do you layout a plan?
There are a few basic steps to creating a floor plan:
- Choose an area. Determine the area to be drawn.
- Take measurements. If the building exists, measure the walls, doors, and pertinent furniture so that the floor plan will be accurate.
- Draw walls.
- Add architectural features.
- Add furniture.
What is plan view and elevation view?
The types of drawings most commonly used are plan and elevation views. The plan view, or bird’s eye view, is the view seen looking down on the object. The elevation view is the view from one side of the object. Engineers and architects also use rough drawings and scaled drawings.
How do you create a detail view?
Creating a Detail View / Detail View Profile
- In the Drawing window, click Detail View in the Views toolbar ( Details sub-toolbar).
- Click the callout center.
- Drag to select the callout radius and click a point to end the selection.
- Click to generate the detail view.
What do you understand by the term front view?
A front view is a projection view obtained by drawing perpendiculars from all points on the edges of the part to the plane of projection. The plane of projection upon which the front view is projected is called the frontal plane.
What are the kinds of view?
The Four Types of Point of View
- First person point of view. First person perspective is when “I” am telling the story.
- Second person point of view.
- Third person point of view, limited.
- Third person point of view, omniscient.
What is meant by plan layout?
Layout planning is deciding on the best physical arrangement of all resources that consume space within a facility. These resources might include a desk, a work center, a cabinet, a person, an entire office, or even a department.
How do you make a site plan?
- How to create a Site Plan.
- Use a Scale.
- Draw Property Lines.
- Draw all Buildings and Structures on the Plan.
- Draw Driveway and Parking on the Plan.
- Other Items that must be on the Plan.
- Locate Grand Trees.
- Sample Site Plan.
What is a section view?
What is a section view? A sectional view or a section looks inside an object. Sections are used to clarify the interior construction of a part that cannot be clearly described by hidden lines in exterior views. The unwanted portion is mentally discarded exposing the interior construction.
Why is front view called elevation?
Along a horizontal axis (often the z-axis): The front and back views, which are known as elevations (because they show the heights of features of an object such as a building). Along an orthogonal axis (often the x-axis): The left and right views, which are also known as elevations, following the same reasoning.
What is the purpose of the plan view?
The plan view is often used to show the floor plan of a building or equipment room. Usually the plan view shows the building with the roof removed and the ob- server is looking down at the floor or floor plan.
What is meant by plan view in engineering drawing?
Plan view mostly referred to Civil Engineering Drawing and it is Top view and if its external appearance.Some drawings mention the sectional detail viewing from top at different levels such as Ground plan, First floor plan, Second floor plan and so on. Product drawing detail it as Top View in Mechanical…
Which is the right side of a plan view?
The right side view or right elevation shows the length and height of the right side. The left view or left elevation shows the length and height of the left side. The rear view or rear elevation shows the width and height of the rear side. The bottom view is not a plan view, but rather it is a view from beneath the object looking up.
What do the view and elevation on a plan mean?
The top view or plan view shows the width and length of the top. The right side view or right elevation shows the length and height of the right side. The left view or left elevation shows the length and height of the left side. The rear view or rear elevation shows the width and height of the rear side.