Table of Contents
How do I get my Subaru out of security mode?
If You have consistent problems with Your alarm system You will want to contact a Subaru service center to make sure there are no problems with the alarm’s computer. To reset the immobilizer in a Subaru hold down the panic button for 2 to 5 seconds then press lock two times.
How do I reset my Subaru Outback security system?
- Sit in the driver’s seat, close all doors and the rear gate or trunk lid etc.
- Open and close the driver’s door one time. then Within 45 seconds.
- open and close the driver’s door once.
- turn the ignition key from LOCK to ON 10 times within 15 seconds.
What does security indicator light mean Subaru?
That’s the Security Indicator Light, and it’s blinking, it’s telling you that the car’s security sytem is armed. When the car is locked and off, the Security Indicator Light will blink steadily. It will trigger shortly after the engine has been turned off and the key has been removed from the ignition.
What does the red car with lock symbol mean?
Red light came on and now the car won’t turn over. Red light is a car with a lock. This is your car immobilizer light that indicates the car is armed. The immobilizer, usually called Securi-Lock in Ford vehicles, is a passive anti-theft device that disables your vehicle’s ability to start without the key.
Why is the security light on?
On your particular vehicle the security light staying on as the vehicle is running is an indication that the security system has failed and is disabled. It is common for a security light to come on after battery dies because the computer may lose its programming to the key.
What does the blinking red key light mean?
This is an indicator for the security system. It lets you know the vehicle immobilizer is armed, and that the vehicle will not start without the proper key (yours).