How is bitumen consumption calculated?

How is bitumen consumption calculated?

How Much Bitumen Used in Road Construction Per Kilometre?

1. Find out the dimension (Width and thickness)
2. Calculate Volume of Asphalt = (Long * Width * Thickness) m^3.
3. Find out the density of Asphalt (2330 or 2450 Kg/m^3)
4. Calculate the quantity of Asphalt= ( Density* Volume) Kg/MTon.

What area will 1 ton of tarmac cover?

Coverage – m2 – TONNES CALCULATION

At an average thickness of	1 tonne will cover
50mm	8 – 10 m2
60mm	7 – 8.5 m2
75mm	5 – 6.5 m2
100mm	4 – 5 m2

What is the price of bitumen today?

Packed Bitumen	Price (in Rs.)
VG 10 (80/100)	52790
VG 30 (60/70)	53590
VG 40 (30/40)	56270

What is the rate of applications for bituminous tack coat in L sq m?

Application of Tack coat: The tack coat shall be applied on paved surfaces and vertical surfaces, such a concrete, which will be in contact with the asphalt paving by means of bitumen distributor at a maximum rate of 0.25 liters per square meter or as directed by the client representative.

How much does it cost to build 1km of road?

Officials of the National Highways Authority of India (NHAI) estimate the average cost of building fourlane highways at Rs 8-9 crore per km and six-lane highways at around Rs 14 crore per km, inclusive of land costs.

What is the meaning of 60 70 bitumen?

The penetration of Bitumen is used to measure its grade. It is reported as a penetration value of mm/10. Bitumen penetration grade 60/70 means the penetration value is in the range 60 to 70 at standard test conditions which commonly used as a Paving Grade.

What is the density of bitumen?

1.01-1.05 g/cm 3
The density of bitumen is 1.01-1.05 g/cm 3 in the temperature range of 25°C to 85°C [63] .

How is bitumen sold?

In order to transport the bitumen by pipeline, it is blended with diluent on-site and shipped and sold as diluted bitumen (dil-bit). The process to get the final product to market would be: Blend the bitumen and diluent.

What is the price of bitumen in India?

Questions & Answers on Bitumen

Type Of Bitumen	Min Price	Max Price
Industrial Grade	Rs 23500/Ton	Rs 41000/Ton
Asphalt	Rs 25500/Ton	Rs 27500/Ton

What is the thickness of tack coat?

From Table 1, based on the 0.75 foot design for hot mix asphalt, the estimated number of layers for total thickness between 0.51 and 0.75 foot or less is three layers. Because the hot mix asphalt is placed on aggregate base the number of layers requiring tack coat is reduced from three to two.

What is bitumen road?

Bituminous road consist of their surface with bituminous materials which is also called as Asphalt. It is sticky dark viscous liquid obtained from natural deposits like crude petroleum.

How to calculate the volume of asphalt you need?

The calculation process is: 1 Estimate the volume of asphalt needed, using geometrical formulas and plans or measurements, including width, length,… 2 Estimate the density of the hotmix to be used. Standard density for asphalt is 145 lb/ft 3 (2322 kg/m 3 ). 3 Multiply the volume by the density (in the same units) to get the weight More

How much does a ton of asphalt weigh?

When calculating asphalt weight, make sure you do not confuse tonne (metric ton) with ton (short ton). The first is used by all countries in the world, except the U.S. and is defined to be equal to 1000 kg by the international body of standardization. The ton is currently only used in the United States and is equal to 2000 pounds (2000 lbs).

What’s the standard density of asphalt per ft?

Standard density for asphalt is 145 lb/ft 3 (2322 kg/m 3). Multiply the volume by the density (in the same units) to get the weight The measurements are not always precise and there might be waste during the application process, so you should consider purchasing 5-6% more asphalt than estimated so you don’t run just short of what you actually need.

Which is larger 1 liter or 2 meters?

1 liter =. 0.01 m 2. 1 m 2 =. 1000 liter. 2 liter =. 0.0159 m 2. 2 m 2 =. 2828.4271 liter. 3 liter =.