Table of Contents
- 1 Where is the serial number on a Mercury outboard motor?
- 2 How do you start a Mercury 25 hp 2 stroke?
- 3 What year did Mercury stop making 2 strokes?
- 4 How much does a 25 HP Mercury 2 stroke weight?
- 5 What is the lightest 25 hp outboard?
- 6 Can you repair a mercury water pump without the serial number?
- 7 Do you need a model year for a Mercury?
- 8 Where do I Find my Mercury Motor serial number?
Where is the serial number on a Mercury outboard motor?
All Mercury outboard engines either have an identification tag or an instruction plate that contains the serial number. The ID tag is located on either side of the swivel bracket (or transom bracket), and the instruction plate is located between the thumb screws above the steering tube.
How do you start a Mercury 25 hp 2 stroke?
How to Start a Mercury 2-Stroke Outboard Motor
- First, tilt the engine so that the fuel can more easily reach the carburetor.
- Prime the bulb until it’s too hard to squeeze.
- While in neutral, advance the throttle to ⅔
- Turn the key, push to choke and crank.
- Release the choke and return to neutral.
How much does a 20 hp Mercury outboard weight?
Specifications – 20 EFI
| HP / kW | 20 / 14.7 |
|---|---|
| Dry weight *Lightest model available | 99 lbs / 45 kg |
| CARB star rating | 3 |
| Bore and stroke | 2.40 x 2.24″ / 61 x 57 mm |
| Ignition | CDI w/electronic spark advance |
What year did Mercury stop making 2 strokes?
Mercury actually quit building all of its traditional two-strokes, from 2.5 hp to 200 hp, following the 2005 model year.
How much does a 25 HP Mercury 2 stroke weight?
How much does a 25 HP Mercury 2 stroke weight?
| HP / kW | 25 / 18.6 |
|---|---|
| Gearcase ratio | 1.92:1 |
| Dry weight *Lightest model available | 157 lbs / 71 kg |
| CARB star rating | 3 |
| Bore and stroke | 2.40 x 2.36″ / 61 x 60 mm |
How much does a 25 hp Mercury weigh?
Specifications – 25 EFI
| HP / kW | 25 / 18.6 |
|---|---|
| Dry weight *Lightest model available | 157 lbs / 71 kg |
| CARB star rating | 3 |
| Bore and stroke | 2.40 x 2.36″ / 61 x 60 mm |
| Ignition | CDI w/electronic spark advance |
What is the lightest 25 hp outboard?
Yamaha F25
Completely reinvented and a 2017 IBEX Award Winner, the all-new Yamaha F25 is the lightest 25-horsepower outboard on the water—two stroke or four stroke….Specs & Compare.
| Engine Type | 2 cyl |
|---|---|
| Compression Ratio | 9.3:1 |
| Fuel Induction System | EFI |
| Weight † | 57kg (126 lbs) – 65kg (143 lbs) |
| Recommended Fuel | Octane 87 |
Can you repair a mercury water pump without the serial number?
While one water pump repair kit might fit some of those models, there’s no guarantee it’s compatible with your motor if you order it without knowing your outboard’s exact serial number. To confuse matters further, Mercury has been known to change the design of a particular engine mid-way through a year.
Is the serial number of a mariner motor the same as a Mercury Motor?
PLEASE NOTE: leading zeroes are not relevant, e.g. “0B123456” is the same as “B123456” in the listing. However, later model serial will begin with a “1” or higher in pace of the “0”; those ARE significant . US-made Mariner motors are identical with Mercury serial number ranges and use these same charts.
Do you need a model year for a Mercury?
Mercury has never really used model years for much of anything other than “sales tools” in dealerships. We WILL need your serial number to look up correct parts.
Where do I Find my Mercury Motor serial number?
We carry Mercury outboard motor parts for vintage and current model outboards. Your Mercury serial number is the key to finding the correct parts for your motor. Mercury serial numbers are usually found on an ID tag on the engine mounting bracket. MarineEngine.com keeps thousands of Mercury parts in stock.