Table of Contents
Can a Jeep clutch be adjusted?
A Jeep Wrangler’s transmission is operated by a simple hydraulic system and adjusting the clutch is referred to as “bleeding” the clutch. Bleeding or adjusting the clutch can be done in less than 30 minutes using simple tools.
Why does my clutch grabs high?
Barring a push rod that has been misadjusted, a high engagement usually indicates a thin clutch friction disc. The disc is so thin that as soon as the release bearing pushes against the pressure plate fingers the pressure plate is already moving back out of the way with very little travel needed.
What adjustments can be made on a hydraulic clutch system?
The only way to adjust a hydraulic clutch is by adjusting the length of the slave-cylinder pushrod. If your pushrod is not adjustable, you may be able to find a suitable replacement at a junkyard that you can install.
When do you need to adjust the clutch on a Jeep Wrangler?
If the clutch pedal in your Jeep Wrangler begins to feel spongy, you have difficulty shifting and sometimes the gears in the manual transmission grind, you may need to adjust the clutch. A Jeep Wrangler’s transmission is operated by a simple hydraulic system and adjusting the clutch is referred to as “bleeding” the clutch.
Are there manual transmissions on the Jeep Cherokee XJS?
There are several manual transmissions used in the Cherokee XJs. If you click on the links below you’ll see an exploded view of the transmissions, and those diagrams will help you identify the one you have.
Why does my Jeep Wrangler clutch keep bleeding?
Keep checking that the clutch reservoir is full of fluid. Discontinue bleeding when the clutch pedal feels stiff. If the Jeep’s clutch pedal does not stiffen after completing the above steps, most likely the hydraulic clutch system has a damaged part. If the clutch is not operating properly after bleeding it, avoid driving the Jeep.