Can you have more than one muster point?

Can you have more than one muster point?

A workplace should have multiple muster points distributed around its perimeter if the facility is large or complex. This will ensure everyone inside has a safe area they can reach quickly during an emergency.

What requirements must exit routes meet OSHA?

An exit route must meet minimum height and width requirements. The ceiling of an exit route must be at least seven feet six inches (2.3 m) high. Any projection from the ceiling must not reach a point less than six feet eight inches (2.0 m) from the floor.

What are the requirements for confined space?

OSHA defines a confined space as meeting all of the following criteria:

• Is large enough for an employee to bodily enter and work; and.
• Has limited or restricted means of entry and exit; and.
• Is not designed for continuous occupancy.

What is the minimum width of an exit route?

28 inches wide
An exit access must be at least 28 inches wide at all points.

How far should a muster point be from a building?

Locate Your Muster Point in a Safe and Visible Area A minimum distance of 1.5 times the height of the building is often advised to ensure safety in situations where the walls might collapse. Do not locate your muster point in an area with overhead power lines, traffic, or hazardous terrain.

Where is the best place for muster point?

It should be located away from trees, power lines, poles, gas lines and dense traffic areas. 9. Exit to the Muster Point should take everyone out of the premises, 10. Moving from the Muster Point to a secondary location should not take people through the premises once outside.

How many evacuation routes should employees be aware of at a minimum in case of an emergency?

Make sure you know the location of areas of refuge or safe holding areas, evacuation devices, fire-rated doors and accessible exit routes. Discuss these with emergency managers. Identify at least two exit routes. Identify “buddies” who are prepared to assist you during an evacuation.

What is the minimum oxygen level for a confined space?

19.5 %
19.5 % Minimum acceptable oxygen level. 15 – 19% Decreased ability to work strenuously. Impair coordination. Early symptoms.

What is the first rule for a confined space entry?

1. Monitor the atmosphere. Atmospheric monitoring is the first and most critical rule, as most fatalities in confined spaces are the result of atmospheric problems. Remember, your nose is not a gas detector — some hazards have characteristic odors and others do not.

How much space is needed for a walkway?

Kitchen Walkway Aisle Spacing The recommended minimum width for walkways is 36 inches. Walkways can be as wide as you wish.

What are the requirements for a confined space?

A confined space (and a permit-required confined space) must have an entry port that is large enough to allow full-body entry. If the entrance is too small for a worker to completely enter, or if the space itself is too small for a worker to completely enter, then OSHA’s standard does not apply.

When to use purging and ventilation in a confined space?

When a confined space is known to contain hazardous contaminants, it is crucial to purge the space adequately before any entry. Subsequently, continuous ventilation should be provided to maintain a safe work environment. It is also important to note that purging and ventilation do not exclude the need for gas testing.

Where to place air moving device in confined space?

It is important to ensure that air moving device is placed where the air is drawn into the confined space from a contaminant-free source. For example, it is not appropriate to place the air moving device behind a diesel generator where the exhaust gas of the generator could be drawn into the confined space.

What does OSHA mean by ” entry ” in confined spaces?

OSHA’s permit-required confined spaces standard defines “entry” at 1910.146 (b): “Entry means the action by which a person passes through an opening into a permit-required confined space.