Does bow string length matter?
Recurve and Longbow Strings If you shoot a recurve, your bowstring is usually 4 inches shorter than the bow’s length. If you shoot a longbow, the bowstring is 3 inches shorter. Bows with a heavy draw weight need more strands to handle that weight, and lighter-weight bows need fewer strands.
How long should my compound bow string be?
The AMO represents the length of the bow from tip to tip, and the generally accepted rule among archers is the correct bowstring length on a longbow is 3″ less than the AMO, and on a recurve it is 4″ less the AMO.
Can you extend the draw length of a compound bow?
Adjustable cams allow the archer to adjust his or her draw length with the use of an hexagonal wrench without, in most cases, pressing the compound bow. Adjustable compound bow cams allow archers to adjust anywhere from 3 inches up to 13 inches depending on the compound bow.
How long should my arrows be for a 27 inch draw?
The arrow must be 29″ in length and supported by two points, which are 28″ apart. The number of inches the arrow deflects or bends due to the weight, is the spine size or measurement of an arrow. DYNAMIC spine describes the way an arrow reacts from the stored energy of a bow as it is shot.
What is Dacron string?
Dacron (strength per strand = 22.5 kg (50 lb), stretch = 2.6%), a commonly used polyester material. Because of its durability and stretch, Dacron is commonly used on beginners’ equipment, wooden bows, and older bows. Dacron strings are easy to maintain and can last several years.
Can you change the draw on a compound bow?
To adjust the draw weight on a compound bow, take it to an archery shop. A bow technician will evenly tighten the limb bolts and check the draw weight. One full turn of the limb bolts usually changes its weight about two pounds. By increasing your draw weight just a few pounds at a time you’ll avoid injury.