Menu Close

How do you bypass anti-theft on a 1998 Ford Expedition?

How do you bypass anti-theft on a 1998 Ford Expedition?

How do you reset the anti theft system on a 1998 Ford Expedition? Put the key in the ignition and turn it to the run position. Theft indicator proves out after 2 seconds and then flashes rapidly. After 15 minutes of flashing, The theft indicator will stop flashing.

How do I get my Ford Expedition out of theft mode?

To reset the anti-theft, get inside the car and insert the key. Start the car and leave it on for 15 minutes, until You see the flashing light speed come to normal. If this doesnt work, then pop the hood and disconnect the battery for fifteen minutes and the anti-theft will be reset.

How do you bypass the anti-theft system on a 1999 Ford f150?

How do you turn off the anti-theft system on a Ford f150?

  1. Turn off the ignition and check your doors – all of them have to be closed.
  2. Insert the key in the ignition and turn it to “On”.
  3. Triple-push the power door unlock button.
  4. Turn the key to “Off”.
  5. Push the power to unlock the button 3 times again.

How do you bypass the anti-theft system on a 1999 Ford Explorer?

First, go to the driver’s side of Your vehicle, and insert the key into the lock. Turn the lock to the right, or to the unlock position. Hold this position and count for 25 to 40 seconds. Doing this will bypass the anti-theft system.

How do you bypass the anti theft system on a 1999 Ford Explorer?

How do I disarm my Ford Anti theft system?

Locate the override button on the alarm box, beneath the driver’s side of the dashboard. Press the button and hold it in until the alarm beeps one time. The LED light for the alarm should stop blinking, indicating the antitheft system is disabled.

How do you reset the anti-theft system on a 2000 Ford Expedition?

Turn the ignition on and off three times, on the third turn leave the ignition running. Press and release the brake pedal, and then turn the ignition off. Repeat these steps again for a second time. After the second time a horn should go off letting the driver know that the sensor has been reset.

How do I bypass the security system on a 98 Ford Explorer?