Table of Contents
How do you prepare a ship bridge before departure?
- Ensure that those aboard are intended to be there before departure. Check for stowaways.
- All watertight doors and hatches should be secured.
- Loose gear on all decks should be secured.
- Clear all obstructions or floating debris around the vessel.
- Ensure proper PPE for all at mooring lines.
- Inform engine room before cast-off.
What is to be prepared by master when vessel arrives a port for the first time regarding medical condition?
According to Article 37 of the IHR (2005) [6], ‘the master of a ship, before arrival at its first port of call in the territory of a State Party, shall ascertain the state of health on board, and, except when that State Party does not require it, the master shall, on arrival, or in advance of the vessel’s arrival if …
What should you do when preparing a main engine for departure?
Things to do at 1 hour notice period
- A quick round of engine room is taken and chief engineer has to be reported regarding the departure.
- Check oil level, header tank level, cylinder oil daily tank level.
- Check the pressure of fuel oil pump, booster pump, lube oil pump etc.
- Check sump oil level in air compressor.
What is a pre departure checklist?
Make sure the steering and throttle controls are operating properly. Check the electrical system and that all lights are working properly. Check for any fuel leaks from the tank, fuel lines, and carburetor. Check the propulsion and cooling systems. Check the oil level, and inspect the engine compartment for oil leaks.
What are the bridge checklists?
Bridge Checklists
- Familiarisation with Bridge Equipment.
- Preparation for Sea.
- Preparation for Arrival in Port.
- Pilotage.
- Passage Plan Appraisal.
- Navigation in Coastal Waters.
- Navigation in Ocean Waters.
- Anchoring and Anchor Watch.
What is port arrival?
Port of arrival means the water, air, or land port at which the article of food is imported or offered for import into the United States. For an article of food arriving by land, this is the port where the article of food first crosses the border into the United States.
What clause is added whenever the port requires lightering procedure before entering the port?
“Provided the vessel has complied with the draft provision in Clause 3, any lightening necessary at ports) of discharge to enable the vessel to reach her discharging berths) shall be at Charterers’ risk and expense, time counting as laytime or time on demurrage but time shifting from the place of lightening to the …
What are the preparations before starting the auxiliary engine?
Lubrication of Main Engine: Start pre-lubrication of the engine well before starting the marine engine. For the main engine it should be started before 1 hour and for auxiliary 4-stroke engines at least 15 minutes in advance.
How do you prepare the main engine of a ship?
Preparing To Start Ship’s Main Engine
- Air systems. a) Drain any water present in the starting air system.
- Lubricating oil systems.
- Cooling water systems.
- Slow turning the engine with the turning gear.
- Slow turning the engine on starting air (blow through)
- Fuel oil system.
- Miscellaneous.
How is a passage plan prepared on a bridge?
Vessel’s passage plan should be prepared and available on the bridge, checked and approved by the Master with its route displayed on primary and secondary ECDIS and/or available paper charts. An effective weather review should be conducted in order to finalize the plan.
Why is the arrival of a ship at Port important?
Arrival at port is an important part of a ship’s voyage and there are actions to be taken aiming to ensure the smooth sail and safe approach of the ship at port. Failure in carrying out the appropriate procedures might lead to unfavorable situations both for vessel and port.
Why do ships have to be prepared for a voyage?
In order to reduce this number, deck department has to be well prepared before a vessel’s departure for a voyage at the sea. These preparations may include many complexities and this is the reason why a bunch of things should be considered and prepared carefully, to ensure a smooth voyage passage and safe navigation.
How to prepare for vessel arrival and departure?
1 Ensure that those aboard are intended to be there before departure. Check for stowaways 2 All watertight doors and hatches should be secured 3 Loose gear on all decks should be secured 4 Clear all obstructions or floating debris around the vessel 5 Ensure proper PPE for all at mooring lines 6 Inform engine room before cast-off