Table of Contents
How do you unlock an anti theft ignition?
Turn the key to unlock your car door, but don’t release it. Hold the key in this position for 20 to 30 seconds. This lets the system know you have the correct key, and it can allow you to bypass the alarm system. Some vehicles recognize the key simply by turning the key back and forth in the door lock key cylinder.
How do I reset my aftermarket Immobiliser?
Cycle the key in the ignition from the “Off” position to the “On” position twice in a row. The alarm will emit a chirping sound after turning the ignition to the “On” position the second time. This will reset the alarm, making it ready for reprogramming (if necessary).
How do I reset my anti theft system?
Exit the car with all doors closed and the windows rolled up. Also close and any rear doors such as the trunk, rear hatch and front hood. Lock the car using the drivers side lock and walk away from the car at least ten feet. Wait for fifteen minutes and unlock the door, this should reset the security system.
What to do if your security system breaks on a GM car?
On older GM cars two small wires will break near the tumbler which will activate the system. In this case the tumbler must be repaired or replaced. Call to the dealer, this is their response: Hold the panic button on the key fob for 2 seconds. Close all of the doors and while using the key lock and use the key to unlock the lock the driver’s door.
What should I do if my car key won’t turn?
Do not try forcing or hitting the key in an attempt to get the ignition lock cylinder to turn as this has the potential of damaging the key and/or ignition lock cylinder more. It is not uncommon for modern car keys to cost well over $100 if they break. If the key breaks in the ignition that can be 2 to 10 times more expensive to fix.
How can I use my car key to unlock my car?
Use your car key in the slot on the driver’s side door and hold it for a few seconds after turning it to unlock the door. This trick works sometimes and helps going past the factory alarm. It allows the car’s system to detect that you have the original key.
What to do if your car security system is out of sync?
Using the owner’s manual remove the fuse which will power down the security system. At this point the car will not start, reinsert the fuse to reactive the system. This is known as a soft reboot of the immobilizer. Sometimes the anti theft system can out of sync due to a voltage spike or an operational error.