Table of Contents
- 1 How is FSR calculated?
- 2 What is permissible FAR?
- 3 What is included in FSR?
- 4 What is space ratio?
- 5 How many floors is 1200 square feet?
- 6 What is difference between FAR and FSI?
- 7 What is area ratio?
- 8 Does far include basement?
- 9 What do you mean by Mark to space ratio?
- 10 What is the mark space ratio of a pulse?
- 11 What is the space ratio in logic 0?
How is FSR calculated?
FSR is calculated by dividing the total floor area of a building by the total area of the land, (or site area).
What is permissible FAR?
FAR is calculated by a simple formula – total covered area of all floors divided by the plot area. Suppose the builder has got a plot of 1,000 sq m and the permissible FAR, according to development plans, is 1.5. It is the ratio of the total floor area in the building compared with the total plot area.
What is maximum floor area ratio?
Floor Area Ratio (FAR) is a mathematical formula that determines how many square feet can be developed on a property in proportion to the lot area. The property area is multiplied by the FAR factor; with the result being the maximum floor area allowed for a building on the lot.
What is included in FSR?
Corridors, breezeways and terraces in strata buildings, boarding houses and the like. Vertical circulation (e.g. stairs and lifts) Landings leading to stairs. Car parking that is not strictly ‘required by’ the consent authority.
What is space ratio?
FLOOR SPACE RATIO – means a ratio that is obtained by dividing the total gross floor area of all the buildings on the lot by the net lot area, excluding any areas used for parking purposes unless such parking is the principal use.
What does 0.5/1 floor space ratio mean?
In simple terms, if you have a gross floor area of 500 square metres on a 1000 square metre site, that makes a floor space ratio of 0.5:1.
How many floors is 1200 square feet?
One can do the construction of G+3 Floors on 30×40 /1200 sq ft site (Ground floor left for parking), As per BBMP sanction bylaws for a 30×40 one can get a FAR of 1.75 with 3 kitchen approval (3 units).
What is difference between FAR and FSI?
Floor Space Index (FSI) is the ratio between the total built-up area and plot area available allowed by the government for a particular locality. Floor area ratio (FAR) is the ratio of a building’s total floor area to the size of the piece of land upon which it is built.
What is a good building efficiency ratio?
Commercial projects have always considered the net-to-gross ratio (the ratio of net rentable space versus total gross building space) and are usually 82 percent to 85 percent efficient, while apartments have been far less efficient, with an average ratio of 70 percent to 75 percent.
What is area ratio?
The area ratio is one of the factors that determine the mechanical disturbance of the soil, being the ratio of the volume of soil displaced by the sampler tube in proportion to the volume of the sample.
Does far include basement?
FAR is a floor area ratio for the entire floor area of a building. That includes elevator shafts, hallways, basements, parking garages, stairs. These are not included in a square foot calculation which is just the livable area.
What is a gel space ratio?
Explanation: This ratio is defined as the ratio of the volume of the hydrated cement paste to the sum of volumes of the hydrated cement and of the capillary pores. …
What do you mean by Mark to space ratio?
The ratio of the duration of the positive-amplitude part of a square wave to that of the negative-amplitude part. Also known as mark-space ratio. McGraw-Hill Dictionary of Scientific & Technical Terms, 6E, Copyright © 2003 by The McGraw-Hill Companies, Inc. Want to thank TFD for its existence?
What is the mark space ratio of a pulse?
The ratio in a pulse or square-wave signal of the pulse duration to the time between successive pulses. In a perfect square wave the mark-space ratio is unity.
What is the mark space ratio of 10kHz?
Another term for the mark space ratio is duty cycle. At 10kHz, the entire wave is 100µs and the active part (usually the high part) is 4/5 th of that, so 80µs.
What is the space ratio in logic 0?
The space is the duration (in seconds) of logic 0 output when the voltage will be close to zero potential. The ratio is that of the two durations. It is important to know which resistors are responsible for the duration of mark, and which for the duration of space.