Table of Contents
How many watts do you need to power a sub?
If you have: A factory radio — you won’t need more than 50 to 200 watts RMS of power for the bass. An aftermarket receiver — you might want 200 to 300 watts RMS of power. Amplified speakers with around 50 watts RMS per channel — 250 to 500 watts RMS is a good starting point.
How many watts can a 12 inch sub handle?
This Comp sub features a thick woofer cone with 360-degree back bracing, a strong motor structure and perimeter venting to ensure you get the reliable bass you need. The Comp 12-Inch Subwoofer works best with a sealed or ported enclosure and 150 watts of recommended power. See below for more details.
How many RMS is 2500 watts?
RAZOR Series Subwoofer 1-Channel Amplifier
| Max Power | 2,500 Watts |
|---|---|
| RMS Power 2Ω | 650W x 1 |
| RMS Power 4Ω | 450W x 1 |
| Exclusively At | Walmart |
What amp do I need for 2 10 inch kicker subs?
The subs are 500watts each. If you got the kicker CVR’s those are 400 rms each so if you have 2 you will need a 1000.1 kicker amp, or anything that is a true 1000 watt amp.
How many RMS is a 2500 watt power acoustik amp?
What kind of AMP do I need for my subs?
When choosing an amplifier, the most important thing is to pick one with the right amount of power for your subs. Once you’ve decided how much power you need, you’ll need to decide which type of amp to use. For most bass systems, you’ll want to choose either a mono (single-channel) amp or a 2-channel amp.
How many Watts Does a subwoofer have to have?
The amp is capable of 350 watts RMS x 1 at 4 ohms and 500 watts RMS x 1 at 2 ohms. Let’s say you choose to maximize the amp’s potential and want the system to put out 500 watts RMS. This means your subs have to be wired to form a total impedance of 2 ohms.
Can a Memphis audio amplifier drive two subwoofers?
You have a Memphis Audio SRX500D.1 amplifier and you want it to drive two subwoofers. The amp is capable of 350 watts RMS x 1 at 4 ohms and 500 watts RMS x 1 at 2 ohms. Let’s say you choose to maximize the amp’s potential and want the system to put out 500 watts RMS. This means your subs have to be wired to form a total impedance of 2 ohms.
What should I look for in a subwoofer amplifier?
Posted on 6/24/2015. Anthony, For your subs, look for a mono subwoofer amplifier that can put out between 600 and 1200 watts RMS into a 2-ohm load. As for your full-range speakers, look for a 4-channel amp that can put out 75 to 100 watts RMS per channel at 4 ohms.