Table of Contents
How much does a 416 CAT backhoe weight?
Weights
| Operating Weight – Maximum | 24251 lb 11000 kg |
|---|---|
| Air Conditioning | 99 lb 45 kg |
| Operating Weight – Estimated* | 16532 lb 7499 kg |
| Auto-Shift Transmission | 269 lb 122 kg |
| MP Bucket (0.96 m3/1.25 yd3) – Without Fold-Over Forks | 1642 lb 745 kg |
How much oil does a CAT 289d hold?
Service Refill Capacities
| Cooling System | 3.7 gal (14 l) |
|---|---|
| Engine Crankcase | 3 gal (11 l) |
| Fuel Tank | 24.8 gal (94 l) |
| Hydraulic System | 13.7 gal (52 l) |
| Hydraulic Tank | 10.3 gal (39 l) |
What is cat TDTO oil?
Cat TDTO is formulated for use in Cat equipment friction devices— power shift transmissions, clutches, and brakes—and in other equipment drive train components like final drives, bevel gears, and differentials. This unique additive significantly improves transmission gear wear performance over TO-2 oils.
How do you fill a hydraulic cylinder with oil?
How to Refill an Engine Hoist Hydraulic Cylinder
- Place old newspaper underneath the hoist cylinder to catch any lost hydraulic oil.
- Use a new oil can, or thoroughly clean any old oil out of a used one.
- Insert the spout of the oil can into the cylinder oil fill hole.
- Raise the hoist to its maximum height.
How much does a CAT 316 excavator weight?
37920 lbs
Operating Specifications
| Cooling System Fluid Capacity | 6.4 gal (24 l) |
|---|---|
| Engine Oil Capacity | 3.6 gal (14 l) |
| Fuel Capacity | 76.7 gal (290 l) |
| Hydraulic System Fluid Capacity | 50.2 gal (190 l) |
| Operating Weight | 37920 lbs (17,200 kg) |
How much does a Cat 426 backhoe weigh?
Operating Specifications
| Alternator Supplied Amperage | 52 A |
|---|---|
| Oil System Fluid Capacity | 1.9 gal (7 l) |
| Operating Voltage | 12 V V |
| Operating Weight 2wd | 14623.3 lbs (6,633 kg) |
| Operating Weight 4wd | 14887.9 lbs (6,753 kg) |
How many horsepower is a Cat 289d?
74.3 hp
Engine
| Bore | 3.7 in (9 cm) |
|---|---|
| Engine Model | Cat C3.3B DIT (turbo) |
| Gross Power | 74.3 hp (55 kw) |
| Gross Power – SAE J1995 | 74.3 hp (55 kw) |
| Net Power | 72.9 hp (54 kw) |
What makes a cat 416 backhoe loader so good?
The Cat ® 416 Backhoe Loader delivers exceptional performance, increased fuel efficiency, superior hydraulic system and an updated operator station. • Proportional Thumb Rollers on the Joysticks Improve Aux Hydraulic Control. Ample legroom inside the cab makes rotating the seat simple.
What kind of transmission does a cat backhoe have?
The Cat Backhoe Loader’s load sensing piston pump provides full hydraulic lifting and digging forces at any engine speed. Variable flow pump matches hydraulic power to work demands. A Four Speed Powershift Transmission is available to make shifting gears smooth and as simple as twisting the Powershuttle Lever.
How many grease fittings are in a backhoe?
There are two grease fittings for each universal joint. i01179717 Backhoe Boom, Stick, Bucket, and Cylinder Page 7 192 Maintenance Section Battery – Recycle i01176086 Battery – Recycle SMCS Code: 1401 1. Always recycle a battery.
When to check the refrigerant on a backhoe?
Check the refrigerant before warm weather begins. Check the refrigerant when t Page 6 191 Maintenance Section Backhoe Boom, Stick, Bucket, and Cylinder Bearings – Lubricate Apply lubricant to the grease fittings for the universal joints of each drive shaft to the final drives.