Table of Contents
How to fix E12 washing machine error?
Fix the e12 error in the Bosch washer Start troubleshooting with the simplest methods. So, check if there is water in the water pipe and if there is enough water pressure. Next, inspect the outside of the water supply hose. If it’s all right, unscrew it from the washer, and clean the inlet part of the filter.
What does E12 mean on Beko washing machine?
Error Code E12 Definition: Washing machine has detected overfill. This error code can be caused by oversudsing from overloading or by adding too much detergent. The pressure sensor will read that there is too much water in the washer.
What does E10 mean on a logik washing machine?
Water drain time out or failure
Logik Washing Machine Error 10: “E10” Error Code Definition: Water drain time out or failure. The washing machine has failed to drain the water in allotted time (6 minutes).
What does E21 mean on a logik washer?
Logik washing machine error 21 When your Logik washing machine E21 code displays this also is an indication that that water hasn’t drained properly. Components that need checking include the filter, drain hose, drain pump, level sensor and switch, and wiring.
What does E12 mean on a tumble dryer?
PCB communication error
An E12 error code suggests a PCB communication error or an open circuit on the dryer heater sensor. An E13 error code means that there is an issue with the PCB as does the E14 error code. This could also indicate an issue with the dryer heater or the NTC.
What does E12 mean on a Bosch dishwasher?
limescale
An E12 error code indicates a build up of limescale in the heat pump. Please purchase the Bosch descaler to remove hard water deposits and limescale buildup.
How do I know if my washing machine pump is clogged?
Remove the drain hose by unscrewing the clamps holding it to the pump outlet. Look for blockages inside the hose, says Family Handyman. If you don’t see any, the pump may be blocked or faulty. To check it, you have to disconnect the belt connecting it to the drive motor.
What does E1 mean on a Beko washing machine?
E1. The is error code means there’s been an NTC error detected in the washing machine. This means there’s an issue with the thermistor wiring in the machine, you can check the thermistor to test the connection on Beko washing machines it should read 4700 ohms with a temperature of 25˚C.
What do you need to know about Beko error codes?
Beko Error Codes The Beko error code system is very simple it goes from E1 to E18, if you can correct the error yourself then you’ll simply need to hold down the start button to clear the error code. Remember though if you can’t correct the error or aren’t confident enough to attempt it then we can help!
What does E12 mean on a washing machine?
Error Code E12 Definition: Washing machine has detected overfill. This error code can be caused by oversudsing from overloading or by adding too much detergent. The pressure sensor will read that there is too much water in the washer.
What should the temperature be on a Beko washing machine?
This means there’s an issue with the thermistor wiring in the machine, you can check the thermistor to test the connection on Beko washing machines it should read 4700 ohms with a temperature of 25˚C.