What do I do if my ABS and brake light is on?
If both your ABS Light and brake system light come on, this is an emergency and you need to stop driving right away. Have your entire brake system inspected by a certified mechanic, such as one from YourMechanic.
How do you reset the ABS light on a Chevy Suburban?
Access the parking brake, found in the footwell on the driver’s side. Turn it on and off multiple times, usually three or four. The ABS light should go off, which indicates that it has been reset.
Why is my ABS light on in my Chevy truck?
Look behind each wheel of the Silverado. On the back of the wheel hub are the wires for the ABS system. If the ABS light stays on, then the ABS system has failed. Because the ABS system is secured to the wheel bearings, both units must be changed by a professional mechanic.
Why is my ABS light on in my Chevy Suburban?
Problem Description The anti-lock brake system (ABS) front wheel speed sensors are prone to failure. When a sensor fails, the ABS warning light may illuminate and/or the ABS system may activate erratically.
Why are the ABS brakes on my Chevrolet Express not working?
The defective housing relief valve on the ABS brakes are also attributed to the loss of brake fluid causing the ABS brakes not to work. The Express owners must take this Chevrolet van back to the dealership to have take care of this ABS recall.
Why is the ABS warning light not working?
The ABS warning light works intermittently when there is a problem with the brakes or when there is no problem with the brakes. This warning light problem can prevent the Express owner from servicing the ABS brakes because he does not take the warning light seriously.
Are there any problems with the Chevrolet Express?
Chevrolet Express ABS Problems 1 Defective Housing Relief Valve. The 2003 Chevrolet Express has a recall on the ABS brakes because of a defective housing relief valve which affects more than 68,000 Chevrolet vehicles including 2 Pressure Accumulator Cracks. 3 ABS Warning Light Problems.
How does the GM ABS brake system work?
The antilock brake system (ABS) is controlled by its own computer. When it senses a problem, the ABS module on the dashboard will light up. When the problem is fixed, the module will sometimes still stay on, and it will need to be rest. This is an easy process, and takes a few minutes to complete. Turn the vehicle off and put it into park.