What do the double white lines on a highway mean?

What do the double white lines on a highway mean?

Double white unbroken (continuous) lines mean you are not allowed to overtake in either direction. You can cross an unbroken line to enter a driveway, side road or road-related area from the main carriageway. Unbroken and broken lines are also used to mark the edge of the carriageway.

What is the white line on the shoulder of the road called?

Solid white lines
White lane markings are the most common. Solid white lines define lanes of traffic going in the same direction, or they show you the location of the shoulder of the road. Broken or “dotted” white lines are used to show the center line between lanes.

Is it legal to cross a double white line?

The NSW Roads and Maritime Services state that drivers are allowed to cross a single or double line if the driver wants to enter or leave a property “by the shortest route”.

What is the difference between double white line and double yellow line on a freeway?

In general, white lines are meant to control traffic going in the same direction, while yellow lines are meant to control traffic going in opposite directions. But that system falls apart when it comes to carpool lanes, which are normally marked by double yellow lines to separate traffic going in the same direction.

Can you overtake on double lines?

When passing a cyclist you can cross double lines provided it is safe. You need to be aware and have a clear view of any approaching traffic. You can only overtake and cross the white double lines when there is no vehicles coming towards you on the opposite side of the road and it is safe to do so.

Can you overtake on double broken lines?

You can overtake or do a U-turn across a double broken centre line or a continuous centre line with a broken line to the left of it.

What do double broken lines mean?

Double dividing line You can cross double lines with a broken line close to you to: overtake another vehicle. make a U-turn. enter or leave the road. angle park on the opposite side of the road (without making a U-turn).

When can you cross double line?

In California, you can cross a double yellow line in these situations: To pass a slower vehicle – broken line on your side. If the double yellow line closest to you is broken (dashed), you may cross them to pass another vehicle. (VC 21460(c)(1).)

What do double yellow lines mean?

no waiting at
Double yellow lines mean no waiting at any time, unless there are signs that specifically indicate seasonal restrictions. The times at which the restrictions apply for other road markings are shown on nearby plates or on entry signs to controlled parking zones.

What does a double white line on a road mean?

White lines separate lanes for which travel is in the same direction. A double white line indicates that lane changes are prohibited. A single white line indicates that lane changes are discouraged. When can you cross a double white line where the line nearest to you is solid? Double white lines where the line nearest you is solid.

When to cross the double sold white line?

A solid white line marks the right edge of the roadway or separates lanes of traffic moving in the same direction. You may travel in the same direction on both sides of this line, but you should not cross the line unless you must do so to avoid a hazard. A double sold white line separates two lanes of traffic going in the same direction.

What do two solid white lines on a freeway mean?

What does 2 Solid white lines mean? Double white lines are two solid white lines that indicate a lane barrier between a regular use and a preferential use lane, such as a carpool/HOV. Never change lanes while in these lanes; wait until a single broken white line appears. You may also see these parallel lines in or near freeway on and off ramps.

When do you cross the white line on the road?

A broken white line separates two lanes traveling in the same direction. Once you have signaled, and if it is safe to do so, you may cross this line when changing lanes. A solid white line marks the right edge of the roadway or separates lanes of traffic moving in the same direction.