Table of Contents
What is a 03 error?
Error Code 3 is a Windows error code that appears when the computer cannot find the specified path. This can occur for a number of reasons, including a loss of connectivity to a network location. In both situations, the error is the same: the computer could not find the path to the file.
What does F 03 mean on a washing machine?
“F03” displayed on screen The washer is not emptied. The washer stops the program being executed. Shut down the machine and disconnect power supply.
How do you fix e1 F3?
To fix the problem, you need to check if the flexible tube is correctly placed inside the washing machine’s body, whether it has punctures or pinches. After visual inspection, disconnect it from the pressure transducer and blow it out, removing blockages. Make sure there is no foam or water trapped in it.
What does F5 E3 mean on washer?
lid lock
The F5 E3 alert indicates there is issue with the lid lock. Do not force the lid open, as permanent damage could occur. Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid.
How do you fix an e20 error on a Hoover washing machine?
You can fix this by switching off the machine and shaking the drum forwards and backwards several times. Clean the drain pump/filter and then run a hot wash without any soap powder.
Why is my washing machine showing F?
The F indicates that the washer control detected a component problem. Since the door remained locked, your likely problem was with the drain pump or excessive suds preventing the washer from draining out the water properly.
How do I fix my 03 HiSense washing machine?
F03 — Drainage fault
- The appliance has not emptied.
- Check that the filter in the drain pump is not blocked.
- Check that the drain pipe spigot on the sink is open and the end cap has been removed.
What does E01 and F03 mean?
Posted: 06/23/20. Dear Patty, The problem is most probably a Air Trap Pipe Blockage, It can also be clogged with soap suds and leaking moisture, causing error code F03 E01. When clogged, the nozzle captures air incorrectly, wherefore it presses on the pressure switch.
Why does my washer say F3 E1?
The Whirlpool washer F3E1 error code is a water level system error. The main control is detecting an out of range pressure signal. Check the water level pressure hose from the water level pressure sensor to the air trap. Most the time it’s the pressure switch that has faulted causing this error.