Table of Contents
What is a component importance factor?
The component importance factor, Ip, shall be taken as 1.5 if any of the following conditions apply: The component is required to function for life-safety purposes after an earthquake, including fire protection sprinkler systems. The component contains hazardous materials.
What is importance factor I for residential building?
Importance factor of 1.2 has been specified in new code for residential buildings, in old code residential buildings were assigned importance factor of 1.0.
What is importance factor I for a commercial building?
Being an office building, the importance factor, I, is 1.0 (Table 6 of IS: 1893). Building is required to be provided with moment resisting frames detailed as per IS: 13920-1993. Hence, the response reduction factor, R, is 5.
What is a seismic factor?
The seismic importance factor (Ie) is used in the Seismic Response Coefficient (CS) equations with the intent to raise the yield level for important structures (e.g., hospitals, fire stations, emergency operation centers, hazardous facilities, etc.).
What is importance factor for seismic design?
In seismic design, occupancy importance factor (IF) is a multiplier to increase or decrease the design base shear, according to different occupancy categories or the importance class of a building. All other buildings are included as a lower occupancy category.
What is the seismic importance factor for school buildings?
Hospital & Educational Buildings are special structures with high importance factor ranging around 25-50% analysis score than the residential or commercial structures.
What is the importance factor for seismic loads for a risk category IV building?
1604.5. 2 Importance Factors
| STRUCTURAL OCCUPANCY/RISK CATEGORY | SNOW IMPORTANCE FACTOR, I | SEISMIC IMPORTANCE FACTOR, I |
|---|---|---|
| I | 0.80 | 1.00 |
| II | 1.00 | 1.00 |
| III | 1.10 | 1.25 |
| IV | 1.20 | 1.50 |
What is the importance factor for a risk category II building?
For more information, see Table 1-1 and Table 7-4 in ASCE 7-05 – Minimum Design Loads for Buildings and Other Structures. Category II is the “default,” and therefore, has an Importance Factor of 1.0.
What is the importance factor of a component?
The component contains hazardous materials. The component is in or attached to an Occupancy Category IV structure and it is needed for continued operation of the facility or its failure could impair the continued operation of the facility. All other components shall be assigned a component importance factor, I p, equal to 1.0.
What is the importance factor of a project?
The Component Importance Factor (Ip) of any project will either be assigned as either a 1.0 or a 1.5.
What is the importance factor of a building?
All other components shall be assigned a component importance factor, I p, equal to 1.0. Building and other structures that represent a low hazard to human life in the event of failure, including agricultural, temporary, and minor storage facilities.
Why do I believe motivation is the most important factor?
You have asked why I ‘believe’ that motivation is the most important factor in this regard. If a student is not motivated towards learning, then attitude, concentration and such other factors would be of no use. Environment is not a factor at all. If one is motivated to learn, whatever be the environment, one can learn. High IQ may be of help.