What is a connector bulkhead?
A bulkhead is simply a connector that is installed through the face plate of a GracePort while the cable has one end fixed to the face plate and the other end is typically a 10′ cable that goes inside the cabinet. Bulkheads and cables are offered for a wide variety of our components, including USB, Ethernet, DB9, etc.
What is a bulkhead disconnect?
Bulkhead connectors must be used for applications that require users having the ability to disconnect wires from the chamber. Bulkhead connectors will help engineers avoid problems down the road due to poor sealing or loss of electricity.
What is a bulkhead tank fitting?
Bulkhead tank fittings permit the free flow of liquids for tank or drum drainage or filling. They can be used as an inlet or outlet for faucets, pipes, and spigots.
What is an inline connector?
In-line connectors—This is a pair of male and female connectors that break the cable into two physical cables but maintain signal continuity between them. The connector assembly must have an assembly-level coordinate system on either side representing an entry point and an exit point.
What are feed through connectors?
Our feedthrough connectors are divided in three main categories: Double ended receptacles which mates with plugs from the same series. Pressure seals which enable to perform cable routing without cutting wires.
How do bulkhead connectors work?
A bulkhead fitting allows piping connections to be made to a tank. A hole is cut in the tank into which the fitting body is inserted. A locknut threads onto the body to hold it in place. The locknut puts pressure on the gasket(s) that allows it to make a liquid tight seal.
How do you install a tank connector?
How to Install a Tank Adapter – Simple Instructions
- Drain the tank. If you can’t drain the tank below where the adapter will be installed, prepare for a LOT of leakage and a sub-par install.
- Drill your hole.
- Install the inside of the adapter.
- Screw on the outside of the tank adapter.
- Hook up your pipe or valve.
What is a PVC bulkhead?
PVC bulkhead fittings are used to connect a tank to a pipe line. With a wide range of sizes and fittings made from durable Schedule 80 PVC, we have the PVC bulkhead fitting options you need when setting up a tank and pipe system.