Table of Contents
- 1 What is the command to delete the configuration stored in NVRAM on a device?
- 2 What command erases some content of the NVRAM?
- 3 What is erase startup-config?
- 4 What is WR command in Cisco?
- 5 What command erases the startup configuration?
- 6 What is NVRAM config?
- 7 Which command copies the configuration from RAM into envy RAM?
- 8 How do I uninstall Nvram?
What is the command to delete the configuration stored in NVRAM on a device?
Erase the contents of NVRAM You can use three different commands to erase NVRAM: write erase, erase startup-config and erase nvram. All of them erase the contents of the NVRAM configuration file, so if the device is then reloaded, there is no initial configuration and you have to begin initial device configuration.
What command erases some content of the NVRAM?
Solution(By Examveda Team) The erase startup-config command erases the contents of NVRAM and will put you in setup mode if the router is restarted.
What command do you type to save the configuration stored in RAM to NVRAM?
11. What command do you type to save the configuration stored in RAM to NVRAM? Explanation: To copy the running-config to NVRAM so that it will be used if the router is restarted, use the copy running-config startup-config command (copy run start for short).
What is erase startup-config?
Deletes the startup configuration file. When you execute the erase startup-config command, the device’s startup configuration file is deleted from the system’s internal storage. (The current startup configuration is backed up before it is erased.)
What is WR command in Cisco?
This command copies the active running config in RAM that you have modified to the startup config in flash memory. A shortcut for this command is wr (which is short for write memory).
What does the command Confreg 0x2142 provide?
What does the command confreg 0x2142 provide? A. It is used to restart the router.
What command erases the startup configuration?
Enter config-register 0x2102. Enter end, and then enter the write erase command to delete the current startup configuration on the router.
What is NVRAM config?
NVRAM stores the configuration information on the network server in text form as configuration commands. For all platforms except the Cisco 7000 family, the show startup-config command shows the version number of the software used when you last executed the copy running-config startup-config command.
What command do you type to save the configuration stored in A and B RAM to TFTP server?
Use the copy system:running-config {ftp: | rcp: | tftp:} command to copy the current configuration file to a network server using FTP, rcp, or TFTP. Use the copy nvram:startup-config {ftp: | rcp: | tftp:} command to copy the startup configuration file to a network server.
Which command copies the configuration from RAM into envy RAM?
Copy running-config startup-config or copy run start command copies the current active configuration to NVRAM.
How do I uninstall Nvram?
Shut down your Mac, then turn it on and immediately press and hold these four keys together: Option, Command, P, and R. You can release the keys after about 20 seconds, during which your Mac might appear to restart.
What are Cisco command structures?
There are five command modes: global configuration mode, interface configuration mode, subinterface configuration mode, router configuration mode, and line configuration mode. After an EXEC session is established, commands within Cisco IOS Software are hierarchically structured.