Table of Contents
- 1 What setting do I put my spreader on?
- 2 What do the numbers mean on a rotary spreader?
- 3 What should I set my fertilizer spreader to?
- 4 How many pounds of grass seed do I need for 1000 square feet?
- 5 What is the setting for Scotts Speedy Green 2000?
- 6 What should the setting be on Jonathan Green spreader?
What setting do I put my spreader on?
Place your spreader setting on a low setting (usually one-fourth of the spreader setting range or less). Spread the material over a 50 x 20-foot area (1,000 square feet). If there is material left over, increase your setting. If you come up short, decrease your setting.
What do the numbers mean on a rotary spreader?
For fertilizer spreaders the numbers usually represent the amount of fertilizer that is to be applied over a specific square feet of land. On spreaders you can find numbers such as 5, 5 and a half or 18 and a half. Correlating the numbers on the fertilizer spreader to the numbers on the bag is important.
How do you use Scotts spreader 1000?
With the spreader hopper closed (trigger control away from handle), fill the spreader over a patch of bare ground or driveway/sidewalk. DO NOT fill spreader on the lawn. Sweep up any spilled product. Start walking, then squeeze and hold trigger to release product.
What should I set my fertilizer spreader to?
Set your spreader so that it’s ¾ open when engaged. If, for example, the spreader is calibrated 1 to 20, set it at 15. Place eight pounds of Milorganite into the spreader’s hopper. This is about one-fifth bag, or 8 lbs., of Milorganite, which is equivalent to 24 cups.
How many pounds of grass seed do I need for 1000 square feet?
You will need about 10 pounds of grass seed per 1,000 square feet of lawn. That 50 pound bag of grass seed will cover about 5,000 square feet.
What should I Set my Scotts Speedy Green spreader to?
per 1,000 square feet, set your Scott’s Speedy Green 2000 to 3.75. Set the knob at 7.0 to spread at 4.6 lbs. per 1,000 square feet. What setting should I use on Scotts spreader for grass seed?
What is the setting for Scotts Speedy Green 2000?
What is the setting for Scotts speedy green 2000? per 1,000 square feet, set your Scott’s Speedy Green 2000 to 3.75. Set the knob at 7.0 to spread at 4.6 lbs. per 1,000 square feet. What setting should I use on Scotts spreader for grass seed?
What should the setting be on Jonathan Green spreader?
A spreader setting is the rate in which you apply product to your lawn. Each Jonathan Green product has recommended rates of application, and coverage based on bag size. The application rate is defined as the amount of material applied per unit area of land.