What transmission was in a 97 GMC Jimmy?
4-speed automatic
1997 GMC Jimmy/Transmission
>> 1997 GMC Jimmy 4WD Wheelbase: 107 inches Length: 181.2 inches Engine: 4.3-liter, 190-h.p., V-6 Transmission: 4-speed automatic EPA mileage: 16 m.p.g. city/21 m.p.g. highway Base price: $24,362 Price as tested: $30,816.
What transmission is in 1998 GMC Jimmy?
1998 GMC Jimmy/Transmission
What transmission is in a 1997 s10?
4-speed automatic
5-speed manual
1997 Chevrolet S-10/Transmission
How much does a 4×4 actuator cost?
The 4WD actuator replacement cost will include the cost of purchasing the actuator and the mechanical works involved in replacing the actuator. Generally, the price will range from roughly $25 – $200.
What causes Rev 2 / 4 on GMC Jimmy?
Sorry I don’t always see the Jimmy stuff. That rev/2/4 thing is caused by an internal broken Sunshell and the neck breaks off all at once usually from drivetrain shock as hard 4wd or towing. Noise could be many things as u-joints, hubs, brakes, tires etc so need to look under it and start checking.
How can I tell if my GMC Jimmy 4WD is coupled?
Chack the actuator (crawl under the pass side front) by looking /listening to see it the cable pulls the axle coupler. 3. Check the front axle coupler sensor (wires to it) by unscrewing and pushing the ball in) which tells the TCCM or 4wd computer that the axle is coupled for all 4wd modes.
Why does my Chevy 4 wheel drive not engage?
If it’s electronic, you could have a bad switch, or a bad actuator on the front axle. Either electronic or manual, you could have a mechanical failure inside the front axle housing that is causing it not to engage into 4WD, like broken gears or axles, mis-aligned parts, etc.
Why does my GMC Jimmy have a blinking dash light?
Blinking dash light means the sensor did not work/actuator did not work/ or the TCCM computer is confused – yes it can happen. After you check all operations try and disconnect the battery for 30 min and then retry and that should have cleared any error.