Table of Contents
When entering a highway acceleration lane you should?
D. Accelerate to the speed of traffic. Entrance ramps for highways often have acceleration lanes. When merging with traffic from an acceleration lane, you should put your signal on, look for an opening in traffic, accelerate up to the speed of traffic, and merge into an opening in traffic.
What should you try to not do while in the acceleration lane?
DO NOT stop at the end of an acceleration lane unless traffic is very heavy and you have to stop. Drivers already on the highway should give you room to enter, but if they don’t, DO NOT force your way onto the highway.
What do you do if you have a short acceleration lane?
It is permissible to back up on an entrance ramp or on an expressway never. If the acceleration lane is short, you will need a longer gap to enter traffic. The main factors in determining your speed on an acceleration lane are then amount and speed of traffic on the acceleration lane and expressway.
When entering directly onto a freeway no acceleration lane you should?
Speed up and enter the interstate only after you have identified a gap in traffic. When entering the interstate on a short entrance ramp where there is no acceleration lane, speed up only after you have identified a gap in traffic. In general, you should be stopped while waiting for a gap to appear.
What are four possible problems you may have when entering an expressway?
Problems When Entering Expressway General problems associated with expressway entrances include heavy traffic, short ramps and acceleration lanes, and high walls that may block visibility. Also, traffic ahead on the ramp may slow or stop abruptly.
How should you drive in a curved section of the road?
Slow down! Reduce your speed before approaching a curve. Watch out for road signs warning of approaching curves so that you have ample time to slow down before steering through the curve. It is advisable to drive below the posted speed limit as you approach and drive through curves.
What is the most common mistakes drivers make in entering a freeway?
Failing to indicate when merging, merging too soon and driving too slowly are among the most common errors. Merging too soon. Merging onto the highway near the start of the acceleration lane or through the gore area is illegal.
How fast should you go in an acceleration lane?
Explanation : You must obey the posted speed limit, or, if no limit is posted, drive no faster than 55 mph (88 km/h). the legal limit on an icy or foggy expressway might be 55 mph (88 km/h), but the safe speed to drive would be much lower.
What problems could make entering an expressway difficult?
General problems associated with expressway entrances include heavy traffic, short ramps and acceleration lanes and high walls that may block visibility. Also, traffic ahead on the ramp may slow or stop abruptly. Expressway driving is challenging.
What are the three main components of entering an expressway?
Expressway entrances include three areas: the entrance ramp, the acceleration lane, and the merge area. The entrance ramp allows the driver time to search traffic for flow and traffic gaps and evaluate speed and space requirements before entering.