Table of Contents
When should a working platform be inspected?
A scaffold used for construction should be inspected before it is used for the first time and then every 7 days, until it is removed. It should also be inspected each time it is exposed to conditions likely to cause deterioration eg following adverse weather conditions or following substantial alteration.
What is a inspection checklist?
An inspection checklist is the basic inspection component you use to note and record health and safety inspections. Each inspection checklist is specific to an inspection process; for example, a ladder checklist will contain details specific to inspecting a ladder.
What do safety inspectors look for?
A safety inspection checks to make sure that all of your car’s lights are in good working order. Beyond headlights, this also includes your high beams, emergency flashers (front and back), turn signals (front and back), side lights, brake lights and backup lights.
How do you inspect scaffolding planks?
Inspect wooden planks and ensure there are no cracks or splits greater than 1 /4-inch, long end splits, several large loose knots, warps greater than 1 /4 inch, boards and ends with gouges, mold, separated laminate(s), and grain sloping greater than 1 in 12 inches from the long edge.
What should all working platforms have?
Qualities of a safe working platform
- Be of sufficient size to allow safe passage and use of equipment and materials.
- Must be free from trip hazards or gaps.
- Must be clean and tidy.
- Must be suitable for the task at hand.
- Must be fitted with handrails and toe boards where necessary.
- Must not be overloaded.
What is a safe working platform?
The Regulations define “working platform” as meaning any platform used as a place of work or as a means of access or egress from a place of work. It includes any scaffold, suspended scaffold, cradle, mobile platform, trestle, gangway, gantry and stairway which is so used.
How do I prepare for an inspection?
Fortunately, there are some things you can do to prepare for the inspection.
- Provide open access to areas that need to be checked.
- Clear the perimeter.
- Check the roof.
- Keep a clean house.
- Replace any bulbs that are out.
- Make sure your toilets are functioning properly.
- Put in a fresh furnace return filter.
How do I prepare for an inspection checklist?
Create a list of potential defects and divide them into different categories: major, minor, and critical problems. Get a basic checklist to each meeting. You can pick up one you have used before or a template from a library of inspection checklists.
What type of inspection is required on scaffolds?
Scaffolds must be inspected before they are used and confirmed in the initial inspection report or in a handover certificate. Scaffolds must be inspected every 7 days. Scaffolds must be inspected following events which could affect the safety of the structure, e.g. alterations, adverse weather or an earthquake.
Why is scaffolding inspection important?
Working With Scaffolding There is always a chance of the scaffold getting weakened if erected poorly. To minimise the danger and avoid an accident occurring, it is essential to perform a complete inspection of the scaffolding on a regular basis.
How to use an app to manage inspections?
Manage inspections app 1 Configure the app 2 Edit the app configuration 3 Add location types 4 Add locations 5 Group locations 6 Add inspection forms 7 Review submitted inspections 8 Review inspection insights More
What should I look for in an inspection?
Inspections focus on the safety features of the machine which are essential for its safe operation. There are three levels of checks that you could take: Quick pre-use checks: mainly visual checks that show if there is anything noticeably wrong with the machine.
What does a pre-operation inspection on a MEWP do?
A pre-operation inspection is a visual inspection of a mobile elevating work platform (MEWP) performed by the operator prior to each work shift. The inspection is designed to discover if anything is apparently wrong with a machine before it is put into service.
How to do an inspection in Microsoft Office?
Select the team. Select the Manage inspections tab in Teams. Select from the upper-right corner. Select Customize experience on the left pane. Enter labels in the Main section field for the main category of items to be inspected such as assets, areas, or locations.