Where is the gearbox located?
Frisco
The Gearbox studio is located in Frisco, TX just north of Dallas.
What weight is Pennzoil synchromesh?
1.95lbs
PRODUCT SPECIFICATIONS
| Part # | 3501 |
|---|---|
| SKU # | 265000 |
| Weight | 1.95lbs |
| Transmission Fluid Type | Multi-Vehicle |
| Container Type | Plastic |
How do you check gearbox oil?
How to check gearbox oil level
- Open the bonnet and locate the transmission dipstick (its location should be shown in your owner’s manual).
- Pull the dipstick out of the filler tube.
- Check the colour of the oil.
Do you need an oil pan for a Fiero?
No matter which engine you use, you’ll have to swap on the Fiero intake and belt-driven accessories, and possibly the oil pan and timing cover. There may be some other minor details I haven’t mentioned, as well.
How do you install a LT1 into a Fiero?
Most aftermarket kits that are available for installing an LT1 into a Fiero have you utilize the stock Fiero transmission. What most of these kits require you to do is to move the whole engine and transmission package about 2+ inches to the left of the stock location to accommodate for the extra length the water-pump adds to the engine.
How is the rear transmission mount on a Fiero made?
The rear transmission mount bolts to the transmission but is welded directly to the cradle. It is made from 2 pieces of 1/8″ thick mild steel: Final marking and drilling of the holes is made after final placement of the powertrain is determined.
Can a V8 engine be installed in a Fiero?
How-to install an LT1 V8 and 4T60-E into a Fiero. There are several kits available in the aftermarket that include all of the instructions and parts needed to install a small-block Chevy V8 engine into a Fiero. However, most of these kits are made for earlier versions of the SBC, or pre-LT1 versions.