Table of Contents
To the right of the steering wheel is a button that will be labeled tpms or something close. Hit this and hold it down until it begins to blink. Once it blinks leave the car sit for about 20 min, as it will take this long for it to recalibrate.
Where is the TPMS reset button on a 2013 Kia Soul?
Locate the reset button on the lower right portion of the steering wheel. Depress it while the car runs until the light flashes three times. Wait a few more seconds while the system records the new pressure of each tire then turn the ignition off. Restart the car and the TPMS warning should be switched off.
Where is the TPMS reset button on a 2010 Kia Soul?
Locate the TPMS reset button. It should be below the steering column. Hold that button down until the light in the instrument cluster blinks three times. Give the system a few minutes to retrieve readings from all four sensors.
How do you reset the tire pressure light on a Kia Soul?
To reset the tpms on the 2019 kia soul make sure the tire pressure is correct, then turn on the vehicle. Now hit the reset button that is to the right of the steering wheel and wait ten minutes. In some cases you may need to hold the button down till the light flashes.
How do I turn off tire pressure light?
Turn the car key to “on” but don’t start the vehicle. Press and hold the TPMS reset button until the tire pressure light blinks three times. Release the button and start the car. The light should go off within 20 minutes.
Why is my tire pressure light still on after filling tires?
If you’ve added air but the air pressure warning light stays on, there’s a problem with your Tire Pressure Monitoring System or you have a slow leak. Quick Tip: If the TPMS warning light comes back on after you’ve filled the tire with air, recheck the tire to make sure it is inflated to the proper air pressure.
How to reset the tire pressure light at home?
How to reset tire pressure light 1 Make Sure You Have the Correct Pressure. Before you try to reset your TPMS light, you should always ensure that you have the right tire pressure in your vehicle. 2 Use the Car’s TPMS Reset Button. 3 Remove and Re-Connect the Car Battery. 4 Use a TPMS Reset Tool for Your Vehicle.
When to reset the tire pressure monitoring system?
If you have driven with low air pressure in one or more tires, you must reset the system after the tire has been inflated. Here is how to reset the TPMS system. TPMS stands for “Tire Pressure Monitoring System” and it appears on your dashboard with a warning light whenever your car tires are irregularly inflated.
What does the TPMS warning light on my car mean?
TPMS stands for “Tire Pressure Monitoring System” and it comes on your dashboard with a warning light whenever your car tires are irregularly inflated. The TPMS light could indicate that your TPMS is not properly recalibrated or that your tire pressure is too low.
What’s the best way to check tire pressure?
Use a tire pressure gauge to check the tire pressure. Inflate each tire to its ideal PSI, then deflate the tires to zero. Then inflate again and drive for a couple of minutes at 15 mph to manually calibrate the sensors. If you want to learn more about how to find the correct tire pressure, you can check out this guide: Tire pressure