Table of Contents
Why is my Bosch dishwasher flashing check water?
A Bosch dishwasher check water and rinse aid light flashing may indicate that the anti-flood switch has been activated. This is often caused by a blocked drain or a faulty drain pump, and you may find water leaks under the machine.
What does check water mean on Bosch classixx dishwasher?
If you’ve got this error message there’s a chance your dishwasher has stopped mid-cycle, either through power-cut, the law of random-averages, or because your toddler has figured out how to open the door.
How do you fix a dishwasher that will not fill with water?
Your dishwasher may not be filling with water simply because the water valve’s filter screens are dirty and debris-filled. Gain access to your water inlet valve and try cleaning it out. This might be enough to solve the problem. You can learn how to access your water inlet valve in the section.
Why does my Bosch sms50e12au keep flashing?
Thanks for the question regarding your Bosch SMS50E12AU. The active and end lights flashing generally means a blockage in the drain system somewhere. Checking and cleaning the filters, the drain hose and where it connects to the drain pipe is a recommendation for this fault.
Why does my Bosch dishwasher have a warning light?
A Bosch dishwasher check warning light flashing alongside error code E22 indicates there’s residual water in the sump which can be caused by a blocked pump, or a dirty filter. A replacement pump may need to be fitted.
Why does my Bosch water pump keep flashing?
The active and end lights flashing generally means a blockage in the drain system somewhere. Checking and cleaning the filters, the drain hose and where it connects to the drain pipe is a recommendation for this fault. And if the pump cover is fitted correctly and there’s no blockage you can find, a service call would be needed.
How much water is left in Bosch dishwasher drain well?
Cleaned out everywhere except some muck stuck in one of the passages. With the Bosch SMS50E12AU/07 dishwasher is it normal for the salt reservoir to remain 9/10 full of water and the drain well to have 2cm of water remaining at the completion of a wash (usually ‘Quick 45’). Thanks in anticipation of your advice.