Table of Contents
- 1 Why is my DVD not showing pictures?
- 2 What do you do if your DVD wont play on your TV?
- 3 Why is there no sound coming from my DVD player?
- 4 Why is my DVD player not reading the disc?
- 5 Why has my DVD player stopped reading discs?
- 6 How do I get the sound to work on my DVD player?
- 7 How do you reset a DVD player?
- 8 How do you get a DVD to work?
Why is my DVD not showing pictures?
Ensure the video cable between the DVD player and TV is securely connected to both devices. NOTE: If the issue only occurs with the first DVD, then the disc may have dust, fingerprints or scratches. Ensure the TV and DVD player are set to utilize the same type of video signal, either progressive or interlaced .
What do you do if your DVD wont play on your TV?
How to Fix DVD Won’t Play – 7 Solutions
- Solution 1: Check if the DVD type is incompatible with DVD player.
- Solution 2: Clean the dirty DVD or try a different disc.
- Solution 3: Ensure solid connection between DVD player and TV.
- Solution 4: Install Third Party DVD Player Software.
- Solution 5: Update DVD Firmware.
How do you fix a DVD that is not reading discs?
How to Fix Sony or Other DVD Player Not Reading/Loading Disc?
- Check if the disc is placed correctly and if the disc is in good condition. Make sure the disc isn’t put in upside down and also ensure the disc isn’t out of alignment in the loading tray.
- Check DVD player’s loading tray, laser lens and servo alignment.
Why is there no sound coming from my DVD player?
Ensure the disc is inserted into the DVD player correctly. Ensure the audio cables from the DVD player are connected properly to the television or stereo receiver. Try playing a different audio source through the television or receiver. Connect the DVD player to a different audio input on the television or receiver.
Why is my DVD player not reading the disc?
Use a soft cloth to clean the disc ; the disc may have fingerprints or smudges. Examine the disc for any cracks or scratches that might be interfering with playback. Make sure the disc playback is not restricted by parental control options. Make sure the DVD disc is compatible with the player.
What causes a DVD not to play?
Playback problems with a DVD typically are caused by one of four factors: The DVD is dirty and smudged; the laser lens in the DVD player’s disc drive needs cleaning; the DVD player no longer is tracking properly; or the disc is scratched.
Why has my DVD player stopped reading discs?
When the DVD player says no disc, it means the sensor is not recognizing a disc in the tray. The cleaning should help solve this problem but it may persist. Try a number of different discs to see if the problem is disc-related. Use commercial discs and nothing homemade or pirated as those are not likely to read.
How do I get the sound to work on my DVD player?
Connect the AUDIO OUT ports on your DVD player to the AUDIO IN ports on your TV with standard audio cables (red and white jacks). Connect the AUDIO OUT ports on your TV to your speakers using a standard audio cable, or a Digital Audio (Optical) cable.
Why is audio not working through HDMI?
Disconnect the HDMI cable from the HDMI input of the TV and connect the source device to a different TV. If there is still no sound, perform a power reset on the TV . If there is still no sound after power resetting the TV, replace the HDMI cable. Perform a factory reset .
How do you reset a DVD player?
On the DVD remote control, press the UP ARROW or DOWN ARROW button to select the SETUP icon. Press the ENTER button. Press the UP ARROW or DOWN ARROW button to select RESET . Press the ENTER button.
How do you get a DVD to work?
Clean the disc with warm water, soap, and a cloth and then dry it, making sure that no lint is left behind. Squeeze toothpaste onto the disc and rub it on the disc in a straight motion from the center out to the edges. Finally, wash off the toothpaste and dry the disc. It should work now!