Table of Contents
Why is my emergency brake light and ABS light on?
Most commonly, this light is triggered by low brake fluid or an engaged parking brake. However on some vehicles, it can simply indicate a problem elsewhere in the system and can be illuminated immediately if there is an ABS fault.
How do you reset the ABS light on a Dodge Ram 1500?
To reset the abs light open the hood, loosen the nut on the clamp of the negative battery cable, then take it off and wait 15 seconds.
How do you reset the ABS light on a Dodge?
You can reset this light by disconnecting the battery.
- Open the hood on your Dodge Ram and prop it up with the hood prop.
- Loosen the nut on the clamp of the negative battery cable using the socket wrench.
- Remove the negative battery cable from the battery terminal by sliding it up and off the battery.
How do I turn off the blinking brake light?
What to do:
- Push the brake pedal a few times to ensure contact between the brake pads and discs.
- Switch the dashboard off for a few seconds.
- Turn the dashboard back on again and see if the light still remains. If the brake warning light is still illuminated, then seek assistance and advice.
Why is my ABS light on in my Dodge truck?
The ABS light being on could mean that there is a problem with the ABS system. This article applies to the Dodge Ram (1994-present). The ABS (Anti-lock Brake System) light should only come on when you turn your key to “On” as a way to check that the light works or when the ABS system is activated.
What causes a blinking brake light?
A red light that flashes on and off could signal low/almost empty brake fluid, but also a serious issue with the brake’s hydraulic system. An expert technician can identify the cause and determine what your braking system needs, whether it’s a brake fluid flush or brake repair.