Menu Close

Will a fuel pump work without a relay?

Will a fuel pump work without a relay?

Without the fuel pump relay, you won’t even be able to drive your vehicle. The fuel pump relay allows the fuel pump to power up when you turn on your vehicle, and allows it to shut down when you turn the ignition off.

How do you reset a fuel pump relay?

How to Reset a Fuel Pump Shut Off Switch

  1. Locate your car’s inertial trigger or airbag control module.
  2. Push the button on the inertial switch; it should be clearly marked as the fuel pump reset, and may be in a contrasting color to the case.

How can I tell if a relay is bad?

You want to feel and listen for any clicks. If you feel and hear clicks, the relay works on one side – the side with the energizing circuit and coil. However, if there was no sound from the horn, the relay has a problem along the contact circuit.

Can Autozone test a relay?

A relay can be checked with a jump cable, a voltimeter, an ohmimeter or a test light. If the terminals are accessible and the relay is not controlled by a computer, the fastest method will be a jump cable and a test light. If the voltage is not present, the relay coil is defective.

How long do fuel pump relays last?

On average, a fuel pump relay will last for 160,000 km to 300,000 km. If the car is daily driven, the said mileages could mean that the car is used for around eight to 15 years already. If your car reaches this point, then it could mean that you need to replace it so your fuel pump will work properly.

Can AutoZone test a fuel pump relay?

AutoZone makes checking fuel pressure easier than ever. While testing does entail some work, few things are more rewarding than successfully troubleshooting your fuel pump relay. And with a fuel pressure test gauge from AutoZone, it’s easy.

Can AutoZone test a relay?

What would cause a fuel pump relay to go bad?

The most common cause of a fuel pump relay going bad is electrical power surges that increase the voltage. The fuel pump relay is designed to have a winding that causes contacts to pass current or voltage. In some cases, the current or voltage might be so high that the contacts get burned.

How much does a relay cost?

You can buy a relay for as low as $5 for a generic multi-purpose relay or as much as $350 for a complex, direct-fit relay. A starter relay costs around $20 to $80 while a main relay costs around $20 to $200.