Table of Contents
- 1 What is principle of resonance in Sonometer?
- 2 What is Sonometer and how it works?
- 3 What is the principle of resonance?
- 4 What is Sonometer give its use?
- 5 How do you do a Sonometer experiment?
- 6 What is resonance and example?
- 7 What kind of relationship does A sonometer show?
- 8 What kind of heat meter is A sonometer?
What is principle of resonance in Sonometer?
A Sonometer is a device based on the principle of Resonance. Resonance: When the frequency of the applied force is equal to the natural frequency of the body, the body vibrates with very large amplitude. Corresponding intensity of sound will be maximum. This phenomenon is known as resonance.
What is Sonometer and how it works?
A sonometer consists of a hollow rectangular wooden box to which a uniform wire is attached at one end. The frequency of vibration of the wire can be varied by either changing the positions of the knife edges by changing the vibrating length or by placing different weights in the pan by changing the tension.B
What is Sonometer explain?
A sonometer is defined as. The device that is used for demonstrating the relationship between the frequency of the sound that is produced by the string when it is plucked and the tension, length, and mass per unit length of the string.
Why is Sonometer called Sonometer for what is it used for?
Answer: Sonometre is made from two words Sono + metre. Sono means sound. Thus sonometre is an device used to measure frequency of sound wave.
What is the principle of resonance?
The principle of resonance affects how we perceive sound and light waves. All objects possess a natural or resonant frequency at which they tend to vibrate.Shah
What is Sonometer give its use?
A Sonometer is a device for demonstrating the relationship between the frequency of the sound produced by a plucked string, and the tension, length and mass per unit length of the string.
What is and Sonometer device?
A sonometer is a diagnostic instrument used to measure the tension, frequency or density of vibrations. They are used in medical settings to test both hearing and bone density. In audiology, the device is used to test for hearing loss and other disorders of the ear.
What is a Sonometer wire?
The string wire of the sonometer is a non-magnetic metallic wire like brass or copper. Then the resonance takes place and the wire vibrates with maximum amplitude. At this stage, the length of the wire segment is called the resonating length and it increases with increase in the mass of the suspended weights.
How do you do a Sonometer experiment?
Real Lab Procedure
- Place the sonometer on the table.
- Make sure that the pulley is frictionless.
- Stretch the wire by placing a suitable maximum load on the weight hanger.
- Move the wooden bridges outward, so that the length of wire between the bridges is maximum.
- Take a tuning fork of known frequency.
What is resonance and example?
In physics, resonance is a phenomenon in which a vibrating system or external force drives another system to oscillate with greater amplitude at specific frequencies. [ example ] A familiar example is a playground swing, which acts as a pendulum.
What is resonance in AC circuit?
The resonant frequency of the circuit is the frequency at which the amplitude of the current is a maximum and the circuit would oscillate if not driven by a voltage source.
What is the function of bridges in Sonometer?
The sonometer allows accurate variation of the tension in the wire, by hanging a series of masses from the end arm, and the length of the wire by moving the bridges. μ may also be varied by using different wire thicknesses. A pickup coil is used to detect the vibrations.
What kind of relationship does A sonometer show?
A Sonometer demonstrates the relationship between the frequency of the sound produced by a plucked string, and the tension, length and mass per unit length of the string. These relationships are usually called Mersenne’s laws after Marin Mersenne (1588-1648), who investigated and codified them.
What kind of heat meter is A sonometer?
The SONOMETER™1000 is an ultrasonic static compact heat meter especially designed for heating, cooling or combined heating/cooling application in local and district heating systems.
How is A sonometer used in the real world?
A sonometer is a device based on the principle of Resonance. It is used to verify the laws of vibration of stretched string and also to determine the frequency of a tuning fork.
How is A sonometer used in a nut shell?
SUMMARY/CONCLUSION In a nut shell, a sonometer is a device for demonstrating the relationship between the frequency of the sound produced by a plucked string, and the tension]