Menu Close

Which command is used to get you to privileged EXEC mode Dell?

Admin

Which command is used to get you to privileged EXEC mode Dell?

Command Syntax

Command Explanation
Console# configure terminal Enter config mode
Console(config)# aaa authorization exec default local Configure an user to enter privileged EXEC mode using local method.

Which keystrokes can be used to return to the privileged mode from the interface configuration mode?

To return to privileged EXEC mode, press Ctrl-Z or enter end.

How do I put my Dell switch into control mode?

To enter the Global Configuration mode, enter the command configure in Privileged Exec mode. The system prompt will change to “(config)# ” which gives you access privilege to all Global Configuration commands.

How do I log into Dell switch?

To access the switch’s management, perform the following steps:

  1. Connect a personal computer to any of the Ethernet ports on the switch.
  2. Assign the personal computer an IP address 192.168. 2.10 and subnet mask 255.255.
  3. Open up a web browser and type in 192.168.
  4. Log in with username admin and a blank password.

What is privileged EXEC mode?

privileged EXEC mode is the system administrator mode. In this mode configuration files can be read, the router can be rebooted, and operating parameters can be changed. global configuration mode is used to modify system-wide configuration parameters, such as routing tables and routing algorithms.

Which commands that allows you to move from privileged to global configuration mode?

Global Configuration mode mode allows users to modify the running system configuration. From the Privileged mode a user can move to configuration mode by running the “configure terminal” command from privileged mode. To exit configuration mode, the user can enter “end” command or press Ctrl-Z key combination.

How do you enter privileged EXEC mode on a Cisco switch?

To enter privileged EXEC mode, enter the enable command. Privileged EXEC From user EXEC mode, enter the enable command. disable command. To enter global configuration mode, enter the configure command.

What is privileged EXEC mode in Cisco?

How do I change my Dell switch password?

Setting Passwords

  1. Open the console interface.
  2. Enter the default user name and password “admin” for the Privileged Exec level.
  3. Type “configure” and press .
  4. Type “username guest password 0 password,” for the Normal Exec level, where password is your new password.

How do I save my Dell switch configuration?

To Backup Configuration

  1. On the left menu, click Switch Management then File Update and Backup.
  2. Click on Edit next to Backup Files.
  3. Under File Type And Protocol click Startup Configuration and HTTP.
  4. When you click OK the configuration will be saved locally on your computer for future use.

How do I find the IP address of my Dell switch?

Connect to the switch using your web browser. The default IP address is 192.168. 0.1. Click System Manager and select IP Settings from the submenu.