Menu Close

How do I find my NFPA label?

How do I find my NFPA label?

NFPA Rating Criteria and NFPA Labels Different colors represent different types of hazards. A number rating system of 0-4 is provided to rate each of the four hazards and is placed on a placard. 0 represents the least hazardous while 4 represent the most hazardous.

Where is NFPA on SDS?

In a 2013 interpretation letter, OSHA confirmed that SDS authors may include HMIS and NFPA ratings in Section 2 of the SDS as long as they do not contradict or cast doubt on the HCS 2012 classification. We have emphasized the last part of that statement.

Where should NFPA diamonds and labels be?

Positioning NFPA Diamond Labels In general, it goes on the upper half of the truck so that it is the most visible, but that is not strictly required. When placing labels on containers, it is simply necessary to place them in such a way as to ensure they are easily visible.

What is an NFPA label?

NFPA 704 is a labeling system used to identify hazardous materials. It is published by the National Fire Protection Association (NFPA). NFPA diamond labels can be used on any type of chemical container to alert people to the specific hazards present.

What is a 704 placard?

NFPA 704 Placards are required for any business or commercial building that has a quantity of hazardous materials equal to or greater than a total weight of 500 pounds solid, 55 gallons liquid, 200 cubic feet of gas or where a radioactive product is used, stored or handled.

What is the NFPA 704 standard?

The NFPA 704 standard is widely used and recognized by fire and emergency responders and safety personnel for identifying the hazards of short term/acute exposure to materials under conditions of fire, spill, or similar emergencies.

Where did NFPA 704 come from?

“NFPA 704: Standard System for the Identification of the Hazards of Materials for Emergency Response” is a standard maintained by the U.S.-based National Fire Protection Association. First “tentatively adopted as a guide” in 1960, and revised several times since then.

What is SA on NFPA 704?

SA indicates the material is a simple asphyxiant gas. Examples of simple asphyxiants include nitrogen, argon, helium, and carbon dioxide. *Fueling stations that handle only motor vehicle fuels stored in underground storage tanks are exempt from NFPA 704 posting.

Is NFPA 704 required?

A: The NFPA 704 standard is a voluntary standard. NFPA 704 signs are required when another federal, state or local regulation or code requires their use. Some of the more widely adopted and used NFPA codes that require 704 signs for specific occupancies, storage and hazardous materials include: NFPA 1 – Fire Code.

What do NFPA 704 symbols tell you?

The National Fire Association (NFPA) has developed a color-coded number system called NFPA 704. The system uses a color-coded diamond with four quadrants in which numbers are used in the upper three quadrants to signal the degree of health hazard (blue), flammability hazard (red), and reactivity hazard (yellow).

Are NFPA labels required by OSHA?

Their answer: Yes, OSHA will continue to allow NFPA and/or HMIS rating systems on labels and SDSs as supplemental information. Or, employers can continue to use their current labeling system as long as all of the required information is immediately available to employees when they are in their work areas.

Which number on an NFPA 704 label indicates the most severe hazard?

Number System: NFPA Rating and OSHA’s Classification System 0-4 0-least hazardous 4-most hazardous 1-4 1-most severe hazard 4-least severe hazard • The Hazard category numbers are NOT required to be on labels but are required on SDSs in Section 2.