Menu Close

How do you reset the service light on a Audi A3?

Admin

How do you reset the service light on a Audi A3?

Audi A3: How to Reset Service Reminder Light

  1. Step 1 – Press “Trip Reset” button and start engine. Pull the knob located on the right-hand side of the instrument cluster (trip reset button).
  2. Step 2 – Turn engine off.
  3. Step 3 – Repeat the procedure.

How do I reset my Audi service reminder?

Step 1: Let’s Do It!

  1. Put key into ignition.
  2. Press and hold trip reset button on the instrument cluster.
  3. Turn key to II position.
  4. Release the button.
  5. Turn the clock adjustment button on the instrument cluster clockwise.
  6. On the LCD screen you should now see “SERVICE IN 15000KM” message on with red backlight.

How do you turn off service light on Audi A3?

Press knob on right-hand side of instrument cluster. Turn engine off and then restart your engine to check the service light is no longer on display on the dashboard of your A3. Figure 2. Switch off the engine in your Audi A3. If the service light still appears on the dashboard of your A3, then you will need to repeat the above instructions.

Where is the reset button on an Audi A3?

Let’s get started! Pull the knob located on the right-hand side of the instrument cluster (trip reset button). This will allow you to enter the reset mode. Release the knob. Rotate the left-hand knob one full turn. This is the clock control, and it, too, is located on instrument cluster.

Why is there a reminder light on my Audi A3?

The service reminder light on the dashboard of your Audi A3 is there to ensure you are current on your regularly scheduled maintenance. Once this maintenance is complete, the light will need to be reset through your A3’s VCDS or Vag Com Diagnostic Software.

How do you reset the oil service light?

And, SERVICE OEL or OIL, for the Oil Service interval. The oil service light reset procedure is as follows. Start with the ignition turned OFF Press and hold the button on the right side of the display. While turning the ignition on (position 2) Service OEL / OIL, should be displayed.