Table of Contents
How many quarts does a Dodge Avenger take?
4.5 quarts
Engine Oil
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 4.5 quarts. (with filter)After refill check oil level. |
| Torque: | 30 ft/lbs (Oil Drain Plug) |
What type of transmission fluid does a Dodge Avenger take?
Oil Type: Dexron VI. Volume: 1 Quart.
How many quarts of oil does a 3.6 Avenger have?
5.9 quarts
5.9 quarts. (with filter)After refill check oil level.
How many quarts of oil does a 2011 Dodge Avenger 3.6 take?
How do you reset the oil change light on a Dodge Avenger?
To reset the oil change service light indicator system for a Dodge Avenger (after performing the scheduled maintenance) perform the following procedure.
- Turn the ignition switch to the ON position.
- Fully depress the accelerator pedal slowly 3 times within 10 seconds.
- Turn the ignition switch to the LOCK position.
How much oil does a 08 Dodge Avenger take?
Capacity: 4.5 quarts. (with filter)After refill check oil level.
How much oil does a 2008 Dodge Avenger take?
5.5 quarts
Capacity: 5.5 quarts. (with filter)After refill check oil level.
Why is my check engine light on in my Dodge Avenger?
This indicator is part of the onboard diagnostics (OBD-II) system and in all cases it indicates a problem with your emissions system. Basically, it is an emissions monitoring system. A Check Engine indicator will stay solid or blink.
How do you reset the computer on a Dodge Avenger?
Turn on the ignition but don’t crank the engine. Wait 5 minutes and then replace the ECU fuse. The “check engine” light will blink and then shut off. This will reset the light.
What type of transmission fluid does a 2008 Dodge Avenger take?
Dexron VI
ACDelco A/T Fluid Dexron VI.