Menu Close

What causes the airbag warning light to come on?

Admin

What causes the airbag warning light to come on?

Your airbag clock spring may need replacing. The spring coils throughout your steering wheel and is designed to maintain continuity between the wiring and the driver’s airbag. Over time, the spring can become worn and fail, causing the airbag warning light to illuminate. This defect is more common in older cars.

How do I clear my airbag light?

Conclusion – How to Reset Airbag Light

  1. Turn your ignition on and off.
  2. Restart your vehicle and do a test drive.
  3. Examine the passenger airbag switch.
  4. Inspect whether seat belts are fastened or working correctly.
  5. Verify that the passenger seat sensor is not applied.
  6. Use a scanner with an SRS or airbag light reset option.

How do you reset the airbag light on a Range Rover?

How to Reset the Range Rover Airbag Fault Code

  1. Open the hood and loosen the retaining nut on the cable clamp running to the negative battery terminal.
  2. Slide the clamp off of the negative battery terminal.
  3. Wait 1 minute for the Range Rover’s electronic control module to cycle and reset.

How much does it cost to fix a airbag light?

Number 1 — Reset Airbag Light You’ll need to hire a professional to come in and examine the airbags before you continue to drive the car. This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be up to about $600.

How do you turn off the airbag light on a Range Rover Sport?

To disable the passenger front airbag:

  1. Remove the emergency key from within the Smart key. See UNLOCKING THE VEHICLE.
  2. Insert the emergency key blade into the slot in the switch and rotate to the OFF position.
  3. Make sure the passenger airbag’s operational status indicator illuminates yellow.

What causes an airbag light to come on?

Top 3 of the Most Common Causes 1 Airbag Clock Spring Damage 2 Passenger Occupancy Sensor Damage 3 Airbag Backup Battery Depleted

Is there a way to reset the airbag light?

To do this – you need to use an OBD2 scanner, and it’s not possible in another way. Reset the airbag light and make sure that it disappeared from the dashboard. If it is still there – reread the codes and check for any trouble codes. Restart your car & test-drive.

How can I tell if my airbag sensor is working?

To determine if the sensor is working okay, first check the “Passenger Airbag Off” indicator. If the seat is vacant, this light should be on. When the seat is occupied it should turn off implying that the airbag system is online and functioning. If the light is off when the seat is vacant or vice-versa, there could be a problem with the sensor.

When does the air bag light stop flashing?

The light will flash for exactly seven seconds. Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset.