How do you bypass passive anti-theft system?

How do you bypass passive anti-theft system?

How to bypass a passive anti-theft system? Find the bypass button on the alarm box under the driver’s side of the dashboard. Press and hold the button until the alarm sounds once. The alarm LED should stop flashing, indicating that the anti-theft system has been deactivated.

How do I get the Mercury Mountaineer out of theft mode?

How to Reset a Mercury Mountaineer Alarm

1. Insert the ignition/door key in the door lock on the driver’s- side door of your Mountaineer.
2. Turn the key to the lock position.
3. Turn your key to the unlock position.
4. Turn your key to the lock position.
5. Turn your key to the unlock position. Your alarm is now disabled.

Can you disconnect the anti-theft system?

Hold the key for 30 seconds in the position. There are some cars that will recognize the key by just turning back and forth on the key inside of the door’s lock key cylinder. Try to turn the car key fully both ways to disable its anti-theft system.

How do I reset my anti-theft device?

Exit the car with all doors closed and the windows rolled up. Also close and any rear doors such as the trunk, rear hatch and front hood. Lock the car using the drivers side lock and walk away from the car at least ten feet. Wait for fifteen minutes and unlock the door, this should reset the security system.

How do you reset the anti-theft system on a Ford Explorer?

First, go to the driver’s side of Your vehicle, and insert the key into the lock. Turn the lock to the right, or to the unlock position. Hold this position and count for 25 to 40 seconds. Doing this will bypass the anti-theft system.

How do I disable anti theft system GMC?

How to Disable a GM Passkey System

1. Insert your GM key into the ignition, attempt to start the car, and let it stall. After it stalls, leave the key in the starter in the “On” position.
2. Look at the “Theft Sys” light blinking on your dashboard and wait until the light stays on without blinking.

Is there an anti theft system on a Mercury?

Contrary to popular belief, Ford, Lincoln and Mercury vehicles do not come equipped from the factory with a standard alarm system. Instead, the Ford Motor Company equips its vehicles with a passive anti-theft system, known as P.A.T.S.

When do I need to Reset my passive anti theft system?

Passive Anti-Theft Systems (PATS), also called Ford Securilock, is a vehicle security feature introduced on 1996 and later Ford vehicles. When replacing the Powertrain Control Module (PCM) on a PATS-equipped vehicle, a parameter reset or relearn procedure must be performed after the PCM is installed.

What does Passive Anti Theft System ( PATS ) do?

Passive Anti-Theft Systems (PATS), also called Ford Securilock, is a vehicle security feature introduced on 1996 and later Ford vehicles. When replacing the Powertrain Control Module (PCM) on a PATS-equipped vehicle, a parameter reset or relearn procedure must be performed after the PCM is installed.

How do you reset the anti theft system on a Ford?

Resetting your Ford vehicle system is super easy to do, and anybody can do this in their free time. All you need is the key to the vehicle for this process. Follow these steps to reset the anti-theft system fully: Roll the window down. By rolling the window down, you’re making sure you still have access to the car in case the car locks you out