Menu Close

How do I reset my Panasonic stereo?

Admin

How do I reset my Panasonic stereo?

You want to clear and reset the memory contents.

  1. Turn the system ON.
  2. Press and hold the Power button on the main unit for a minimum of 4 seconds.
  3. Release the Power button. “RESET” is shown on the display.
  4. Turn off the unit and then turn it back on again. All the settings are reset to the factory defaults.

Why is my Panasonic stereo not working?

If your stereo will not turn on, the cable may be damaged. You should first check that the power cable is completely plugged in, and the outlet is working properly. You can simply plug your cable into a new (working) outlet and try turning on the device. Unplug the power cable and inspect the wire for cuts.

How do I reset my Panasonic SA akx18?

You want to clear and reset the memory contents.

  1. Disconnect the AC mains lead.
  2. While you press and hold [ ] on the main unit, connect the AC mains lead again. Continue to press and hold the button until “- – – – – – – – -” is shown.
  3. Release [ ]. All the settings are set back to the factory preset. Print.

How do I reset my Panasonic surround sound?

How do I reset my Panasonic home theater?

  1. Press [POWER Í/I] on the unit to turn off the unit.
  2. Press and hold [5/9] and press [POWER Í/I] and [< OPEN/CLOSE] on the unit at. the same time for more than 5 seconds until “PLEASE WAIT” is displayed on the unit.
  3. The power is turned on and then turned off automatically.

How do I reset my dual radio?

Press the RESET button to reset the unit back to the factory settings if abnormal operation occurs. The reset button is located behind the front panel. With the unit on, press and hold DISP until the clock begins to flash, then release. Press TUNE nnto adjust the hours and TUNE llto adjust the minutes.

Why has my CD player stopped working?

A scratched or damaged disc is often the culprit and not the player. Use a newer disc if possible to ensure the condition is pristine. If the problem persists with the new disc, remove all discs and run a power cycle to reset the player. Remove any batteries or unplug it to drain the power.

What does a off mean on stereo?

The Attenuation (ATT) function is designed to mute the car stereo when you receive a telephone call.

How do I connect my Panasonic SC HC200 to Bluetooth?

How to pair a Bluetooth device. – SC-HC200, SC-HC300

  1. Turn on the Bluetooth feature of the device and place the device near this unit.
  2. Press the Bluetooth. button to select BLUETOOTH.
  3. Press the [PLAY MENU] button to select PAIRING. Or press and hold the Bluetooth [
  4. Select the model ex.

How do I reset my Panasonic Bluetooth headphones?

Touch and hold the touch sensor (R) for about 10 seconds. The earphone LED (blue) blinks rapidly, and when the power turns off, the earphone returns to the factory settings.