Menu Close

How do you program a key fob for a 2011 GMC Terrain?

Admin

How do you program a key fob for a 2011 GMC Terrain?

2011 GMC Terrain

  1. Insert Existing Key. INSERT a working flip key into the Ignition and TURN to the ON/RUN position (just shy of cranking engine).
  2. Remove Key. TURN the flip key to the OFF/LOCK position and REMOVE it.
  3. Insert NEW Key.
  4. Exit Programming Mode.
  5. Program Additional Remotes.
  6. Test Remotes.
  7. Share.

What kind of battery does a GMC key fob take?

To change the battery on this GMC key fob you will need a CR2032 battery. Flip open the metal key. Pry the back cover from the key fob with your thumb. Remove the old battery from the key fob.

Will disconnecting car battery reset key fob?

Disconnecting the battery for a short time may not do the trick because the car’s computer, or ECU, still has some current in it. Waiting for over 15 minutes after disconnecting the engine will help ensure the equipment is reset.

How do you change the battery in a Chevy key fob?

Insert flathead screwdriver into a small slot on the side of the key fob and twist to open. Slide out the current battery, and replace it with a new CR2032 button cell battery, paying attention to the positive side. Press the key fob back together, and all should be set!

How can I tell if my Chevy Cruze key fob is working?

Stand next to your Cruze and test the new key fob battery by pressing the “Lock” and “Unlock” buttons. If the battery is working properly, you should see the parking lights flash and hear the doors locking and unlocking.

How do you change the battery on a Chevy Cruze?

The first step is to eject the flip out or “switchblade” style metal ignition key by pressing the round chrome button at the top left of the fob. Then insert your thumb in to the slot where the ignition key used to reside and firmly pull off the rectangular battery cover on the back side of the fob.

How do you change the battery in a Chevy Camara?

This type of key fob is common on many Chevrolet models, such as the Camara, Cruze, Equinox, Volt, and others from the model years 2010 to 2016. To change the battery: Flip the metal key blade and remove the back cover of the key fob. Remove the dead batter, and insert the new CR2032 3V battery.