Menu Close

Why does my washing machine not fill up all the way?

Admin

Why does my washing machine not fill up all the way?

If your washer doesn’t fill with water, first check that the house water supply to the washer is on. If it is, and the washer won’t fill at all, the inlet valves might have failed. If the washer fills partially, the problem is likely with the temperature selector switch or water-level pressure switch.

How do you fix an uneven washer?

Loading and Distributing the Laundry

  1. Open the front-load washer door. Manually redistribute the load inside the drum.
  2. Add more items to the wash. A single, bulky item, such as a comforter or blanket can cause the unbalanced load.
  3. Avoid overloading your front-load washer.

What is an E20 error on a Simpson washing machine?

There is a problem with the draining of your appliance. Drain pipe blocked up. Blocked/dirty filter.

What does E11 mean on a Simpson washing machine?

Simpson washing machine E11 error indicates that the machine has not filled with water during the wash cycle. See fault E10 for repair procedure. Make sure the tap is turned on and hose is not kinked. Check the mesh screen filter in the water inlet hose and on the back of the water inlet valve for blockages with sand.

What kind of fault does a Simpson washing machine have?

Inspect the pressure sensor tube for visible damage. Simpson washing machine E20 error is a drainage fault, meaning the machine has not registered a drop in the level of water during a draining phase of the cycle. Simpson washing machine E20 fault is one of the most common Simpson washing machine error codes.

How long does it take to reset safety lock on Simpson washing machine?

When the program has finished it may take up to 2 minutes for the safety lock to reset before the door can be opened. If you want to open the door during the wash program refer to the user manual. If outlet hose is lower than the water level on machine the water will continue to syphon / run out of hose on fill cycle.

What causes an E35 error on a Simpson washing machine?

Simpson washing machine E35 error is a overfill fault. This means that the water level is above normal operation level. This error is mainly caused by a faulty water inlet valve that does not shut properly and lets in too much water. Sometimes E35 can also be caused by a partially blocked pressure sensor tube.